{"title":"Audio-Technica","description":"\u003cp\u003eAudio-Technica is a trusted name in vinyl playback, making everything from beloved entry-level turntables to reference phono cartridges. Explore Audio-Technica gear at The 'In' Groove to start or upgrade your setup.\u003c\/p\u003e","products":[{"product_id":"audio-technica-at81cp-replacment-cartridge-p-mount-6-mil-conical","title":"Audio-Technica - AT81CP Replacement Cartridge P-mount, .6 mil Conical","description":"\u003cp\u003e\u003cstrong\u003eA dependable conical workhorse that plugs straight into any P-mount turntable and just plays.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT81CP is a 0.6 mil conical cartridge from Audio-Technica designed for P-mount (T4P) turntables, a popular replacement for the plug-in cartridges originally fitted to many 1980s automatic and linear-tracking tables. It uses Audio-Technica's dual moving magnet design, with two magnets arranged to match the left and right channels of the stereo record groove, for accurate and detailed audio reproduction.\u003c\/p\u003e\n\u003cp\u003eThe bonded round-shank conical diamond is mounted on a carbon-fiber-reinforced ABS cantilever and tracks at a light 1.0-1.5 grams. When the stylus wears out, an ATN81CP replacement stylus drops right in, so the cartridge can stay in service for years.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e0.6 mil conical diamond stylus, bonded round shank\u003c\/li\u003e\n\u003cli\u003eCarbon fiber reinforced ABS cantilever\u003c\/li\u003e\n\u003cli\u003eDual moving magnet design matched to the stereo channels\u003c\/li\u003e\n\u003cli\u003eP-mount (T4P) plug-in design for tool-free turntable installation\u003c\/li\u003e\n\u003cli\u003eLight 1.0-1.5 g tracking force range\u003c\/li\u003e\n\u003cli\u003eUser-replaceable stylus (ATN81CP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dual moving magnet, P-mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus:\u003c\/strong\u003e 0.6 mil conical, bonded round shank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Carbon fiber reinforced ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 3.5 mV (1 kHz, 5 cm\/sec)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20-20,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 18 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Balance:\u003c\/strong\u003e 2.5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.0-1.5 g (1.25 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Load:\u003c\/strong\u003e 47,000 ohms \/ 100-200 pF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Inductance:\u003c\/strong\u003e 400 mH (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Tracking Angle:\u003c\/strong\u003e 20 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e P-mount (T4P) — plugs directly into a P-mount tonearm with no headshell or alignment required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.0 g (0.21 oz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e ATN81CP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":39373146226894,"sku":"4961310157395","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_64fcfca3-bdf1-4398-9ac6-1cfca0e22d1d.jpg?v=1617401442"},{"product_id":"audio-technica-atn95e-replacement-stylus-3-x-7-mil-green","title":"Audio-Technica - ATN95E Replacement Stylus, .3 x .7 mil","description":"\u003cp\u003e\u003cstrong\u003eGenuine Audio-Technica ATN95E replacement stylus — the 0.3 x 0.7 mil bonded elliptical for the classic AT95E cartridge.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT95E was Audio-Technica's workhorse budget cartridge for years and shipped on a great many turntables, including earlier AT-LP120 models. This is its factory stylus: a bonded elliptical diamond on an aluminum pipe cantilever.\u003c\/p\u003e\n\u003cp\u003eAudio-Technica also lists it as the replacement for the discontinued AT93 and AT95. Note that the AT95E generation has been superseded by the VM95 series, and the two are not interchangeable — different body, different generation, and a wider published tracking force range of 1.5 to 2.5 g.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e0.3 x 0.7 mil bonded elliptical diamond\u003c\/li\u003e\n\u003cli\u003eAluminum pipe cantilever\u003c\/li\u003e\n\u003cli\u003eThe factory stylus for the AT95E, fitted to many older turntables including earlier AT-LP120 models\u003c\/li\u003e\n\u003cli\u003eAlso listed by Audio-Technica for the discontinued AT93 and AT95\u003c\/li\u003e\n\u003cli\u003eLegacy generation — the AT95E has been superseded by the AT-VM95 series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Shape:\u003c\/strong\u003e Elliptical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Construction:\u003c\/strong\u003e Bonded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Curvature Radius:\u003c\/strong\u003e 0.3 x 0.7 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Aluminum pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e AT95E, AT93, AT95\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.5-2.5 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Not a VM95 series part. AT-VMN95 styli and AT95 series bodies are different generations and Audio-Technica does not list them as interchangeable.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":39373385269454,"sku":"4961310157364","price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_11500bdf-9a25-4215-a4b2-92239551d867.jpg?v=1617410587"},{"product_id":"audio-technica-at-lp60x-gm-fully-automatic-belt-drive-turntable","title":"Audio-Technica - AT-LP60X Fully Automatic Belt-Drive Turntable","description":"\u003cp\u003e\u003cstrong\u003eThe easiest way into vinyl: Audio-Technica's fully automatic belt-drive classic.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhether you're just getting into records, rediscovering a collection long since buried away, or simply adding a turntable to complete your system, the AT-LP60X is an excellent choice. This fully automatic belt-drive turntable plays both 33-1\/3 and 45 RPM records, and its built-in switchable phono preamp lets you connect it directly to powered speakers, receivers, and other components whether or not they have a dedicated phono input.\u003c\/p\u003e\n\u003cp\u003eAn update of Audio-Technica's popular AT-LP60, the LP60X features a redesigned tonearm base and headshell to improve tracking and reduce resonance, along with an Integral Dual Magnet phono cartridge with a replaceable diamond stylus. An external AC adapter handles the AC\/DC conversion outside of the chassis, further minimizing noise in the signal chain.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFully automatic belt drive — start, return and stop at the push of a button\u003c\/li\u003e\n\u003cli\u003eTwo speeds, 33-1\/3 and 45 RPM\u003c\/li\u003e\n\u003cli\u003eDC servo-controlled motor with an aluminum platter\u003c\/li\u003e\n\u003cli\u003eBuilt-in switchable phono\/line preamp connects to almost anything\u003c\/li\u003e\n\u003cli\u003eIntegral AT3600L dual magnet cartridge; replacement stylus ATN3600LC, with the elliptical ATN3600LE available as an upgrade\u003c\/li\u003e\n\u003cli\u003eRedesigned tonearm base and headshell improve tracking and reduce resonance\u003c\/li\u003e\n\u003cli\u003eDust cover, felt mat, 45 RPM adapter and cables included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Belt drive, fully automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e DC servo-controlled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 33-1\/3 and 45 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatter:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge:\u003c\/strong\u003e AT3600L integral dual magnet — not removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e ATN3600LC; the elliptical ATN3600LE is a drop-in upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWow and Flutter:\u003c\/strong\u003e Less than 0.25% (WTD) at 3 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio:\u003c\/strong\u003e Greater than 50 dB (DIN-B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Level:\u003c\/strong\u003e Phono 2.5 mV \/ Line 150 mV nominal at 1 kHz, 5 cm\/sec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhono Preamp Gain:\u003c\/strong\u003e 36 dB nominal, RIAA equalized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e AC 100-240 V, 50\/60 Hz, 0.6 A max via the external adapter (12 V, 2 A output). US operation 120 V, 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 1.0 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 14.15″ (359.5 mm) W x 3.84″ (97.5 mm) H x 14.70″ (373.3 mm) D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.73 lbs (2.6 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Dust cover, felt mat, platter with drive belt, 45 RPM adapter, RCA audio cable (3.9′ \/ 1.2 m), AC adapter (4.9′ \/ 1.5 m)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Black","offer_id":39373385892046,"sku":"4961310147136","price":179.0,"currency_code":"USD","in_stock":false},{"title":"Gun Metal\/Black","offer_id":39373385924814,"sku":"4961310147167","price":189.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_6bd468ed-5004-4df8-9738-896be7b72221.jpg?v=1617410634"},{"product_id":"audio-technica-at-lp5-manual-direct-drive-usb-analog-turntable","title":"Audio-Technica - AT-LP5X Manual Direct-Drive USB\/Analog Turntable","description":"\u003cp\u003e\u003cstrong\u003eA fully manual, three-speed direct-drive deck that channels more than 50 years of Audio-Technica's Japanese analog design into serious everyday vinyl playback.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-LP5X is built around a direct-drive DC motor with greater than 1.0 kgf·cm of starting torque and an electronic brake system, ensuring stable, on-axis rotation at 33-1\/3, 45 and 78 RPM. An anti-resonance die-cast aluminum platter topped with a 5 mm rubber-damping mat keeps low-frequency noise out of your records, while the external AC adapter handles AC\/DC conversion outside the chassis to reduce noise in the signal chain.\u003c\/p\u003e\n\u003cp\u003eThe J-shaped tonearm draws inspiration from classic Audio-Technica models of the 1960s and '70s, with a metallic gimbal suspension, precision bearings, adjustable counterweight and anti-skate control. It comes fitted with the lightweight AT-HS6 headshell and an AT-VM95E Dual Moving Magnet cartridge with a replaceable elliptical stylus. A built-in switchable MM\/MC phono\/line preamp lets you connect directly to powered speakers, a home stereo or a traditional phono input, and the USB output records your vinyl to a computer at 16-bit\/44.1 or 48 kHz.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect drive with a DC servo motor and greater than 1.0 kgf·cm starting torque\u003c\/li\u003e\n\u003cli\u003eThree speeds, 33-1\/3, 45 and 78 RPM\u003c\/li\u003e\n\u003cli\u003eStatic balanced J-shaped tonearm, 247 mm effective length\u003c\/li\u003e\n\u003cli\u003eRemovable AT-HS6 headshell with an AT-VM95E dual moving magnet cartridge\u003c\/li\u003e\n\u003cli\u003eSwitchable phono preamp handles both moving magnet and moving coil cartridges\u003c\/li\u003e\n\u003cli\u003eUSB output at 16-bit, 44.1 or 48 kHz for digitizing records\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminum platter with a heavy rubber damping mat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Method:\u003c\/strong\u003e Direct drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e DC servo motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 33-1\/3, 45 and 78 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting Torque:\u003c\/strong\u003e Greater than 1.0 kgf·cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatter:\u003c\/strong\u003e Die-cast aluminum with heavy rubber damping mat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTonearm:\u003c\/strong\u003e Static balanced J-shaped, 247 mm effective length, 17 mm overhang\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadshell:\u003c\/strong\u003e AT-HS6 universal half-inch mount, removable, 9 g (0.32 oz) including lead wire, overhang adjustment plus or minus 5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge:\u003c\/strong\u003e AT-VM95E dual moving magnet, 0.3 x 0.7 mil bonded elliptical stylus, removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e AT-VMN95E; accepts any VM95 series stylus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWow and Flutter:\u003c\/strong\u003e Less than 0.2% WRMS at 33 RPM, 3 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio:\u003c\/strong\u003e Greater than 50 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Level:\u003c\/strong\u003e Phono 4.0 mV \/ Line 250 mV at 1 kHz, 5 cm\/sec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhono Preamp Gain:\u003c\/strong\u003e 36 dB for moving magnet, 56 dB for moving coil, RIAA equalized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e 16-bit, 44.1 or 48 kHz, USB-selectable; USB 2.0 compliant; Windows 7 or later, macOS X or later\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e AC 100-240 V, 50\/60 Hz, 0.6 A max via the external adapter (12 V, 2 A output). US operation 120 V, 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 3 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 17.72″ (450 mm) W x 13.86″ (352 mm) D x 6.18″ (157 mm) H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16.1 lbs (7.3 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Dust cover with hinges, rubber mat, platter, counterweight, AT-HS6 headshell with AT-VM95E cartridge, 45 RPM adapter, USB cable (1.9 m), RCA audio cable (3.3′ \/ 1.0 m), AC adapter (4.9′ \/ 1.5 m)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":39373544521934,"sku":"4961310151522","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_ac4df2cb-be32-4ba1-8374-038c2f100efa.png?v=1646793220"},{"product_id":"audio-technica-at-lp7-manual-external-belt-drive-turntable","title":"Audio-Technica - AT-LP7 - Manual External Belt-Drive Turntable","description":"\u003cp\u003e\u003cstrong\u003eAudio-Technica's flagship belt-drive turntable, designed from the ground up around its acclaimed VM cartridge line for true high-fidelity vinyl reproduction.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-LP7 is a fully manual, two-speed (33-1\/3 and 45 RPM) belt-drive turntable whose DC motor employs a speed-sensor system to maintain accurate platter rotation. A 20 mm-thick anti-resonance polyoxymethylene (POM) platter spins atop a 40 mm-thick MDF chassis, a combination engineered to damp vibration and keep the noise floor low.\u003c\/p\u003e\n\u003cp\u003eThe J-shaped tonearm uses a metallic gimbal suspension system with precision bearings for excellent tracking, and comes fitted with the lightweight AT-HS10 headshell and a VM520EB Dual Moving Magnet cartridge offering outstanding channel separation and easy stylus replacement. A built-in switchable phono preamp with both moving magnet (36 dB) and moving coil (56 dB) settings lets the AT-LP7 connect directly to powered speakers or a line input, or run into your own phono stage.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBelt drive with an external DC motor and speed-sensor system\u003c\/li\u003e\n\u003cli\u003e20 mm anti-resonance polyoxymethylene platter\u003c\/li\u003e\n\u003cli\u003eStatic balanced J-shaped tonearm with metallic gimbal suspension and precision bearings, 247 mm effective length\u003c\/li\u003e\n\u003cli\u003eRemovable AT-HS10 headshell with a VM520EB dual moving magnet cartridge\u003c\/li\u003e\n\u003cli\u003eSwitchable phono preamp handles both moving magnet and moving coil cartridges\u003c\/li\u003e\n\u003cli\u003eWow and flutter below 0.08% WRMS\u003c\/li\u003e\n\u003cli\u003eDetachable IEC power cord and internal power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Two-speed, fully manual belt drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e DC motor with speed-sensor system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 33-1\/3 and 45 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatter:\u003c\/strong\u003e 20 mm anti-resonance polyoxymethylene (POM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTonearm:\u003c\/strong\u003e Static balanced J-shaped with metallic gimbal suspension and precision bearings, 247 mm effective length, 17 mm overhang\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadshell:\u003c\/strong\u003e AT-HS10 lightweight universal half-inch mount, removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge:\u003c\/strong\u003e VM520EB dual moving magnet with replaceable elliptical bonded stylus, removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force Range:\u003c\/strong\u003e 0-2.5 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWow and Flutter:\u003c\/strong\u003e Less than 0.08% WRMS at 33 RPM, 3 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio:\u003c\/strong\u003e Greater than 60 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Level:\u003c\/strong\u003e Phono 4.5 mV \/ Line 280 mV for moving magnet at 1 kHz, 5 cm\/sec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhono Preamp Gain:\u003c\/strong\u003e 36 dB for moving magnet, 56 dB for moving coil, RIAA equalized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e AC 100-240 V, 50\/60 Hz, 0.6 A max via detachable IEC cord and internal supply. US operation 120 V, 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 17.72″ (450 mm) W x 13.86″ (352 mm) D x 6.18″ (157 mm) H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 18.3 lbs (8.3 kg) without dust cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e VM520EB cartridge, AT-HS10 headshell, power cord, dual RCA stereo cable, 45 RPM adapter, dust cover\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":39373544554702,"sku":"4961310142438","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_fd97dcd6-c8fa-466b-a673-69f39991d916.png?v=1617416778"},{"product_id":"audio-technica-at-oc9xsl-dual-moving-coil-cartridge","title":"Audio-Technica - AT-OC9XSL Dual Moving Coil Cartridge","description":"\u003cp\u003e\u003cstrong\u003eThe flagship of Audio-Technica's OC9X line, pairing a Special Line Contact stylus with a nude boron cantilever for the most detail this family can deliver.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-OC9XSL is built around Audio-Technica's dual moving coil design, with independent coils for the left and right channels wound from Pure Copper by Ohno Continuous Casting (PCOCC) wire and arranged in a reverse V-shaped formation to minimize stylus pressure and distortion. A neodymium magnet and permendur yoke boost magnetic energy, while the rigid aluminum body suppresses unwanted resonance.\u003c\/p\u003e\n\u003cp\u003eWhat sets the OC9XSL apart within the family is its nude Special Line Contact stylus (1.5 x 0.28 mil) on a 0.28 mm nude boron cantilever — the most refined stylus and cantilever combination in the OC9X series, tracing the groove wall with exceptional precision for extended frequency response out to 50,000 Hz and the line's best channel separation.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSpecial Line Contact stylus with nude rectangular shank\u003c\/li\u003e\n\u003cli\u003e0.28 mm diameter nude boron cantilever\u003c\/li\u003e\n\u003cli\u003eDual moving coil design with independent left\/right coils\u003c\/li\u003e\n\u003cli\u003ePCOCC coil wire in reverse V-shaped formation\u003c\/li\u003e\n\u003cli\u003eNeodymium magnet with permendur yoke\u003c\/li\u003e\n\u003cli\u003eRigid aluminum body to reduce resonance\u003c\/li\u003e\n\u003cli\u003ePre-threaded half-inch mount body for easy two-screw installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dual moving coil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus:\u003c\/strong\u003e Special Line Contact, nude rectangular shank, 1.5 x 0.28 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e 0.28 mm nude boron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Wire:\u003c\/strong\u003e PCOCC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet and Yoke:\u003c\/strong\u003e Neodymium magnet with permendur yoke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 0.4 mV (1 kHz, 5 cm\/sec)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20-50,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 28 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Balance:\u003c\/strong\u003e 0.5 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Load Impedance:\u003c\/strong\u003e Min. 100 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Impedance:\u003c\/strong\u003e 12 ohms (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance:\u003c\/strong\u003e 12 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Inductance:\u003c\/strong\u003e 25 µH (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Compliance:\u003c\/strong\u003e 22 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Compliance:\u003c\/strong\u003e 18 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne (100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Tracking Angle:\u003c\/strong\u003e 20 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Half-inch standard mount, threaded — two screws, no nuts required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.6 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":39373545701582,"sku":"4961310150402","price":819.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_65fef374-1a58-4bda-be31-2e6106fb303c.png?v=1617416835"},{"product_id":"audio-technica-at-oc9xen-dual-moving-coil-cartridge","title":"Audio-Technica - AT-OC9XEN Dual Moving Coil Cartridge","description":"\u003cp\u003e\u003cstrong\u003eTrue dual moving coil performance with a nude elliptical stylus — an inviting entry into Audio-Technica's OC9X series.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-OC9XEN uses Audio-Technica's dual moving coil design, with independent coils for the left and right channels wound from Pure Copper by Ohno Continuous Casting (PCOCC) wire and arranged in a reverse V-shaped formation to minimize stylus pressure and distortion. A neodymium magnet and pure iron yoke enhance magnetic energy, while the rigid aluminum body reduces resonance.\u003c\/p\u003e\n\u003cp\u003eWithin the OC9X family, the OC9XEN is distinguished by its low-mass nude elliptical stylus (0.3 x 0.7 mil) mounted on an aluminum pipe cantilever — a step up from the bonded elliptical of the OC9XEB, with the nude diamond's lower tip mass improving groove tracking and detail retrieval at 0.35 mV output.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNude elliptical stylus (0.3 x 0.7 mil)\u003c\/li\u003e\n\u003cli\u003eAluminum pipe cantilever\u003c\/li\u003e\n\u003cli\u003eDual moving coil design with independent left\/right coils\u003c\/li\u003e\n\u003cli\u003ePCOCC coil wire in reverse V-shaped formation\u003c\/li\u003e\n\u003cli\u003eNeodymium magnet with pure iron yoke\u003c\/li\u003e\n\u003cli\u003eRigid aluminum body to reduce resonance\u003c\/li\u003e\n\u003cli\u003ePre-threaded half-inch mount body for easy two-screw installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dual moving coil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus:\u003c\/strong\u003e Nude elliptical, 0.3 x 0.7 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Aluminum pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Wire:\u003c\/strong\u003e PCOCC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet and Yoke:\u003c\/strong\u003e Neodymium magnet with pure iron yoke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 0.35 mV (1 kHz, 5 cm\/sec)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20-30,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 25 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Balance:\u003c\/strong\u003e 1.5 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Load Impedance:\u003c\/strong\u003e Min. 100 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Impedance:\u003c\/strong\u003e 12 ohms (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance:\u003c\/strong\u003e 12 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Inductance:\u003c\/strong\u003e 25 µH (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Compliance:\u003c\/strong\u003e 20 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Compliance:\u003c\/strong\u003e 9 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne (100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Tracking Angle:\u003c\/strong\u003e 20 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Half-inch standard mount, threaded — two screws, no nuts required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.6 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":39373545734350,"sku":"4961310150433","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_000532ec-cdf0-42eb-ab65-2e2dd53576ea.png?v=1617416838"},{"product_id":"audio-technica-at-oc9xml-dual-moving-coil-cartridge","title":"Audio-Technica - AT-OC9XML Dual Moving Coil Cartridge","description":"\u003cp\u003e\u003cstrong\u003eA MicroLinear stylus and nude boron cantilever make this the long-haul detail champion of Audio-Technica's OC9X moving coil series.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-OC9XML is built on Audio-Technica's dual moving coil design, with independent left and right channel coils wound from Pure Copper by Ohno Continuous Casting (PCOCC) wire and aligned in a reverse V-shaped formation to minimize stylus pressure and distortion. A neodymium magnet and premium permendur yoke enhance magnetic energy, and the rigid aluminum body suppresses resonance.\u003c\/p\u003e\n\u003cp\u003eThe OC9XML's signature is its nude MicroLinear stylus (2.2 x 0.12 mil) on a 0.28 mm nude boron cantilever. The MicroLinear profile's tiny contact radius traces high-frequency groove detail with precision and maintains its shape as it wears, keeping performance consistent over the stylus's life while delivering frequency response out to 47,000 Hz.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMicroLinear stylus with nude square shank (2.2 x 0.12 mil)\u003c\/li\u003e\n\u003cli\u003e0.28 mm diameter nude boron cantilever\u003c\/li\u003e\n\u003cli\u003eDual moving coil design with independent left\/right coils\u003c\/li\u003e\n\u003cli\u003ePCOCC coil wire in reverse V-shaped formation\u003c\/li\u003e\n\u003cli\u003eNeodymium magnet with premium permendur yoke\u003c\/li\u003e\n\u003cli\u003eRigid aluminum body to reduce resonance\u003c\/li\u003e\n\u003cli\u003ePre-threaded half-inch mount body for easy two-screw installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dual moving coil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus:\u003c\/strong\u003e MicroLinear, nude square shank, 2.2 x 0.12 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e 0.28 mm nude boron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Wire:\u003c\/strong\u003e PCOCC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet and Yoke:\u003c\/strong\u003e Neodymium magnet with premium permendur yoke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 0.4 mV (1 kHz, 5 cm\/sec)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20-47,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 27 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Balance:\u003c\/strong\u003e 1.0 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Load Impedance:\u003c\/strong\u003e Min. 100 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Impedance:\u003c\/strong\u003e 12 ohms (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance:\u003c\/strong\u003e 12 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Inductance:\u003c\/strong\u003e 25 µH (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Compliance:\u003c\/strong\u003e 20 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Compliance:\u003c\/strong\u003e 16 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne (100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Tracking Angle:\u003c\/strong\u003e 20 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Half-inch standard mount, threaded — two screws, no nuts required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.6 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":39373545767118,"sku":"4961310150426","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_178d19b7-49a2-43d4-9d33-f9a1d1d85c9a.png?v=1617416840"},{"product_id":"audio-technica-at-oc9xsh-dual-moving-coil-cartridge","title":"Audio-Technica - AT-OC9XSH Dual Moving Coil Cartridge","description":"\u003cp\u003e\u003cstrong\u003eA nude Shibata stylus on a boron cantilever gives this OC9X moving coil rich tone and standout transient response.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-OC9XSH employs Audio-Technica's dual moving coil design, with independent coils for the left and right channels wound from Pure Copper by Ohno Continuous Casting (PCOCC) wire and arranged in a reverse V-shaped formation to minimize stylus pressure and distortion. A neodymium magnet and premium permendur yoke enhance magnetic energy, while the rigid aluminum body reduces resonance.\u003c\/p\u003e\n\u003cp\u003eSetting the OC9XSH apart within the family is its nude Shibata stylus (2.7 x 0.26 mil) mounted on a 0.28 mm nude boron cantilever. The Shibata's large groove-wall contact area enables accurate tracking and delivers rich audio with strong transient response, with frequency response extending to 47,000 Hz.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eShibata stylus with nude square shank (2.7 x 0.26 mil)\u003c\/li\u003e\n\u003cli\u003e0.28 mm diameter nude boron cantilever\u003c\/li\u003e\n\u003cli\u003eDual moving coil design with independent left\/right coils\u003c\/li\u003e\n\u003cli\u003ePCOCC coil wire in reverse V-shaped formation\u003c\/li\u003e\n\u003cli\u003eNeodymium magnet with premium permendur yoke\u003c\/li\u003e\n\u003cli\u003eRigid aluminum body to reduce resonance\u003c\/li\u003e\n\u003cli\u003ePre-threaded half-inch mount body for easy two-screw installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dual moving coil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus:\u003c\/strong\u003e Shibata, nude square shank, 2.7 x 0.26 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e 0.28 mm nude boron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Wire:\u003c\/strong\u003e PCOCC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet and Yoke:\u003c\/strong\u003e Neodymium magnet with permendur yoke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 0.4 mV (1 kHz, 5 cm\/sec)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20-47,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 27 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Balance:\u003c\/strong\u003e 1.0 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Load Impedance:\u003c\/strong\u003e Min. 100 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Impedance:\u003c\/strong\u003e 12 ohms (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance:\u003c\/strong\u003e 12 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Inductance:\u003c\/strong\u003e 25 µH (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Compliance:\u003c\/strong\u003e 20 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Compliance:\u003c\/strong\u003e 16 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne (100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Tracking Angle:\u003c\/strong\u003e 20 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Half-inch standard mount, threaded — two screws, no nuts required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.6 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":39373545799886,"sku":"4961310150419","price":759.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_bb5963ff-dfe7-44e0-9f35-4c1a93913509.png?v=1617416843"},{"product_id":"audio-technica-at85ep-phonograph-p-mount-cartridge","title":"Audio-Technica - AT85EP Phonograph P-Mount Cartridge","description":"\u003cp\u003e\u003cstrong\u003eAn easy elliptical upgrade for P-mount turntables, bringing Audio-Technica's dual magnet engineering to plug-in simplicity.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT85EP is a 0.3 x 0.7 mil elliptical cartridge engineered for P-mount (T4P) turntables, incorporating precision engineering and many features found in Audio-Technica's more expensive cartridges. Its dual moving magnet design uses two magnets arranged to match the left and right channels of the stereo record groove.\u003c\/p\u003e\n\u003cp\u003eThe bonded round-shank elliptical stylus sits at the end of an aluminum pipe cantilever and tracks at a gentle 1.0-1.5 grams, making it a friendly match for the linear-tracking and automatic P-mount tables of the 1980s and beyond. When the stylus wears, simply swap in an ATN85EP replacement, no tools required.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e0.3 x 0.7 mil elliptical stylus, bonded round shank\u003c\/li\u003e\n\u003cli\u003eAluminum pipe cantilever\u003c\/li\u003e\n\u003cli\u003eDual moving magnet design matched to the stereo channels\u003c\/li\u003e\n\u003cli\u003eP-mount (T4P) plug-in design for quick installation\u003c\/li\u003e\n\u003cli\u003eLight 1.0-1.5 g tracking force range\u003c\/li\u003e\n\u003cli\u003eUser-replaceable stylus (ATN85EP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dual moving magnet, P-mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus:\u003c\/strong\u003e 0.3 x 0.7 mil elliptical, bonded round shank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Aluminum pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 3.5 mV (1 kHz, 5 cm\/sec)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20-20,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 20 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Balance:\u003c\/strong\u003e 2.0 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.0-1.5 g (1.25 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Load:\u003c\/strong\u003e 47,000 ohms \/ 100-200 pF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Impedance:\u003c\/strong\u003e 2.8 k ohms (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Inductance:\u003c\/strong\u003e 400 mH (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance:\u003c\/strong\u003e 410 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Tracking Angle:\u003c\/strong\u003e 20 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e P-mount (T4P) — plugs directly into a P-mount tonearm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.0 g (0.21 oz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e ATN85EP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":39373545832654,"sku":"4961310157388","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_65007349-bb8a-476f-9aed-5758a2d682ef.png?v=1617416846"},{"product_id":"audio-technica-at-lp120xusb-fully-manual-3-speed-direct-drive-turntable","title":"Audio-Technica - AT-LP120XUSB Fully Manual 3-Speed Direct Drive Turntable","description":"\u003cp\u003e\u003cstrong\u003eThe modern update to Audio-Technica's legendary AT-LP120-USB, a fully manual, three-speed direct-drive workhorse with a built-in preamp and USB ripping.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-LP120XUSB pairs a direct-drive DC servo motor (greater than 1.0 kgf·cm starting torque, with electronic brake) with a professional-grade anti-resonance die-cast aluminum platter and felt mat, playing 33-1\/3, 45 and 78 RPM records. Variable pitch control with quartz speed lock (±8% or ±16% ranges), a stroboscopic platter with speed indicator and a removable plug-type target light for low-light cueing round out its DJ-inspired feature set, while damped base construction reduces low-frequency feedback.\u003c\/p\u003e\n\u003cp\u003eThe balanced S-shaped tonearm features a hydraulically damped lift control, lockable rest and adjustable dynamic anti-skate, and carries the detachable AT-HS6 universal headshell fitted with an AT-VM95E Dual Magnet cartridge (0.3 x 0.7 mil elliptical stylus, compatible with all VM95 Series replacement styli). A built-in switchable phono preamp lets you connect to phono or line inputs alike, and the USB output digitizes your records at 16-bit\/44.1 or 48 kHz into the recording application of your choice.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect drive with a DC servo motor and high starting torque\u003c\/li\u003e\n\u003cli\u003eThree speeds, 33-1\/3, 45 and 78 RPM, with pitch control and a quartz speed lock\u003c\/li\u003e\n\u003cli\u003eStatic balanced S-shaped tonearm, 230.5 mm effective length, with hydraulically damped lift and lockable rest\u003c\/li\u003e\n\u003cli\u003eRemovable AT-HS6 headshell with an AT-VM95E dual moving magnet cartridge\u003c\/li\u003e\n\u003cli\u003eSwitchable phono\/line output with a built-in preamp\u003c\/li\u003e\n\u003cli\u003eUSB output at 16-bit, 44.1 or 48 kHz for digitizing records\u003c\/li\u003e\n\u003cli\u003eRemovable stylus target light and adjustable anti-skate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Three-speed, fully manual direct drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e DC servo motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 33-1\/3, 45 and 78 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatter:\u003c\/strong\u003e Die-cast aluminum with felt mat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTonearm:\u003c\/strong\u003e Static balanced S-shaped with detachable headshell, hydraulically damped lift and lockable rest; 230.5 mm effective length, 16 mm overhang\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadshell:\u003c\/strong\u003e AT-HS6 universal half-inch mount, removable, 9 g (0.32 oz) including lead wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge:\u003c\/strong\u003e AT-VM95E dual magnet, 0.3 x 0.7 mil bonded elliptical stylus, removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e AT-VMN95E; accepts any VM95 series stylus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-skate Range:\u003c\/strong\u003e 0-4 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWow and Flutter:\u003c\/strong\u003e Less than 0.2% WRMS at 33 RPM, 3 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio:\u003c\/strong\u003e Greater than 50 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Level:\u003c\/strong\u003e Phono 4 mV \/ Line 240 mV at 1 kHz, 5 cm\/sec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhono Preamp Gain:\u003c\/strong\u003e 36 dB nominal, RIAA equalized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e 16-bit, 44.1 or 48 kHz, USB-selectable; Windows 7 or later, macOS X or later\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e AC 100-240 V, 50\/60 Hz, 1.5 A max. US operation 120 V, 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 2.75 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 17.80″ (452 mm) W x 13.86″ (352 mm) D x 5.57″ (141.6 mm) H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 17.6 lbs (8 kg) without dust cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e AT-VM95E cartridge, AT-HS6 headshell, USB cable (6.2′ \/ 1.9 m), dual RCA cable with ground wire, counterweight, felt mat, dust cover, 45 RPM adapter, removable stylus target light\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Black","offer_id":39373547143374,"sku":"4961310148751","price":399.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_7f60e874-c391-48df-8360-72066b556186.png?v=1617416857"},{"product_id":"audio-technica-at33sa-mc-phonograph-cartridge","title":"Audio-Technica - AT33Sa MC Phonograph Cartridge","description":"\u003cp\u003e\u003cstrong\u003eAudio-Technica's first moving coil cartridge with a Shibata line-contact stylus, built on the long-running AT33 platform.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT33Sa pairs the proven AT33-series dual moving coil generator with a nude square-shank Shibata stylus, combining superior high-range performance with strong mid and bass reproduction. The dual moving coil design, wound with PCOCC (Pure Copper by Ohno Continuous Casting) wire, delivers excellent channel separation across a wide 15-50,000 Hz frequency response.\u003c\/p\u003e\n\u003cp\u003eA solid tapered boron cantilever keeps moving mass low, while a double damper construction further reduces weight and enhances audio quality. The aluminum and synthetic resin body keeps overall cartridge weight to a tonearm-friendly 6.9 grams.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eShibata line-contact stylus, nude square shank\u003c\/li\u003e\n\u003cli\u003eSolid tapered boron cantilever for low moving mass\u003c\/li\u003e\n\u003cli\u003eDual moving coil design with PCOCC coil wire\u003c\/li\u003e\n\u003cli\u003eDouble damper construction reduces weight and enhances sound quality\u003c\/li\u003e\n\u003cli\u003eWide 15-50,000 Hz frequency response\u003c\/li\u003e\n\u003cli\u003e30 dB channel separation at 1 kHz\u003c\/li\u003e\n\u003cli\u003eAluminum and synthetic resin body, half-inch mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dual moving coil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus:\u003c\/strong\u003e Shibata (line contact), nude square shank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Solid tapered boron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Wire:\u003c\/strong\u003e PCOCC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet and Yoke:\u003c\/strong\u003e Neodymium magnet with permendur yoke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e Precision-cast hard aluminum alloy with synthetic resin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 0.4 mV (1 kHz, 5 cm\/sec)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 15-50,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 30 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Balance:\u003c\/strong\u003e 0.5 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Load Impedance:\u003c\/strong\u003e 100 ohms minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Impedance:\u003c\/strong\u003e 10 ohms (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance:\u003c\/strong\u003e 10 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Inductance:\u003c\/strong\u003e 22 µH (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Compliance:\u003c\/strong\u003e 40 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Compliance:\u003c\/strong\u003e 10 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne (100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Tracking Angle:\u003c\/strong\u003e 23 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Half-inch standard mount; mounting nuts supplied\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.9 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":39373554286798,"sku":"4961310128968","price":849.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_0b056bc4-5391-4ae1-8f30-c11ff6b6c913.png?v=1617417141"},{"product_id":"audio-technica-at-oc9xeb-dual-moving-coil-cartridge","title":"Audio-Technica - AT-OC9XEB Dual Moving Coil Cartridge","description":"\u003cp\u003e\u003cstrong\u003eThe most affordable way into Audio-Technica's acclaimed OC9X dual moving coil series.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-OC9XEB shares the core engineering of the whole OC9X family: a dual moving coil design with independent coils for the left and right channels, wound from Pure Copper by Ohno Continuous Casting (PCOCC) wire and arranged in a reverse V-shaped formation to minimize stylus pressure and distortion. A neodymium magnet and pure iron yoke increase magnetic energy, and the rigid aluminum body reduces resonance.\u003c\/p\u003e\n\u003cp\u003eAs the entry point of the line, the OC9XEB is fitted with a bonded elliptical stylus (0.3 x 0.7 mil) on an aluminum pipe cantilever — the same true moving coil generator as its siblings at the family's friendliest price, with a 0.32 mV output for use with a moving coil phono stage or step-up.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBonded elliptical stylus (0.3 x 0.7 mil)\u003c\/li\u003e\n\u003cli\u003eAluminum pipe cantilever\u003c\/li\u003e\n\u003cli\u003eDual moving coil design with independent left\/right coils\u003c\/li\u003e\n\u003cli\u003ePCOCC coil wire in reverse V-shaped formation\u003c\/li\u003e\n\u003cli\u003eNeodymium magnet with pure iron yoke\u003c\/li\u003e\n\u003cli\u003eRigid aluminum body to reduce resonance\u003c\/li\u003e\n\u003cli\u003ePre-threaded half-inch mount body for easy two-screw installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dual moving coil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus:\u003c\/strong\u003e Bonded elliptical, 0.3 x 0.7 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Aluminum pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Wire:\u003c\/strong\u003e PCOCC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet and Yoke:\u003c\/strong\u003e Neodymium magnet with pure iron yoke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 0.32 mV (1 kHz, 5 cm\/sec)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20-30,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 25 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Balance:\u003c\/strong\u003e 1.5 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Load Impedance:\u003c\/strong\u003e Min. 100 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Impedance:\u003c\/strong\u003e 12 ohms (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance:\u003c\/strong\u003e 12 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Inductance:\u003c\/strong\u003e 25 µH (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Compliance:\u003c\/strong\u003e 20 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Compliance:\u003c\/strong\u003e 9 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne (100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Tracking Angle:\u003c\/strong\u003e 20 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Half-inch standard mount, threaded — two screws, no nuts required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.6 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":39373562970318,"sku":"4961310150440","price":279.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_a933080d-e8f4-4c03-a4aa-8e309d327dd6.png?v=1617417455"},{"product_id":"audio-technica-at33ev-mc-phonograph-cartridge","title":"Audio-Technica - AT33EV MC Phonograph Cartridge","description":"\u003cp\u003e\u003cstrong\u003eA classic dual moving coil design that makes true MC performance attainable, from Audio-Technica's long-running AT33 series.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT33EV employs Audio-Technica's dual moving coil configuration, which enhances channel separation and extends frequency response compared with traditional single-coil designs. Neodymium magnets provide high magnetic energy, and the coils are wound with PCOCC (Pure Copper by Ohno Continuous Casting) oxygen-free copper wire for pure signal transmission.\u003c\/p\u003e\n\u003cp\u003eA 0.3 x 0.7 mil nude elliptical stylus is mounted on a tapered duralumin pipe cantilever, tracing the groove accurately across a wide 15-50,000 Hz frequency response. The aluminum and synthetic resin body keeps weight to 6.9 grams, and the half-inch mount fits standard headshells and tonearms.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDual moving coil design for excellent channel separation\u003c\/li\u003e\n\u003cli\u003e0.3 x 0.7 mil nude elliptical stylus\u003c\/li\u003e\n\u003cli\u003eTapered duralumin pipe cantilever\u003c\/li\u003e\n\u003cli\u003eNeodymium magnets for enhanced magnetic energy\u003c\/li\u003e\n\u003cli\u003ePCOCC oxygen-free copper coil wire\u003c\/li\u003e\n\u003cli\u003eWide 15-50,000 Hz frequency response\u003c\/li\u003e\n\u003cli\u003eAluminum and synthetic resin body, half-inch mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dual moving coil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus:\u003c\/strong\u003e 0.3 x 0.7 mil nude elliptical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Tapered duralumin pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Wire:\u003c\/strong\u003e PCOCC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e Aluminum and synthetic resin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 0.3 mV (1 kHz, 3.54 cm\/sec)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 15-50,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 30 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Balance:\u003c\/strong\u003e 0.5 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Load Impedance:\u003c\/strong\u003e 100 ohms (with head amplifier)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Impedance:\u003c\/strong\u003e 10 ohms (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance:\u003c\/strong\u003e 10 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Inductance:\u003c\/strong\u003e 22 µH (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Compliance:\u003c\/strong\u003e 40 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Compliance:\u003c\/strong\u003e 10 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne (100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Tracking Angle:\u003c\/strong\u003e 23 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Half-inch standard mount — nuts required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.9 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":39373565198542,"sku":"4961310103972","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_d0a4f980-bb8d-4704-b69e-27658f15221a.png?v=1617417565"},{"product_id":"audio-technica-at-xp3-h-phonograph-cartridge-with-headshell","title":"Audio-Technica - AT-XP3\/H Phonograph Cartridge With Headshell","description":"\u003cp\u003e\u003cstrong\u003eA ready-to-spin DJ workhorse — the AT-XP3 cartridge pre-matched with Audio-Technica's AT-HS6BK headshell.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-XP3\/H pairs Audio-Technica's XP3 dual moving magnet DJ cartridge with the AT-HS6BK headshell for an install-and-go setup on any turntable with a universal (half-inch, 4-pin) tonearm. Built for the rigors of DJ use, the body is molded from highly rigid polyphenylene sulfide (PPS) reinforced with glass fiber, and the design offers maximum visibility of the stylus tip for accurate cueing.\u003c\/p\u003e\n\u003cp\u003eThe 0.6 mil bonded conical stylus rides on a carbon-fiber-reinforced ABS cantilever with nylon wire suspension, delivering great tracking and channel separation for high-fidelity sound at DJ-friendly tracking forces of 2.0-4.0 grams. The cartridge is compatible with any XP or VM95 Series replacement stylus, giving you a wide choice of options for every budget and application — from scratch work to home listening.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAT-XP3 DJ cartridge factory-paired with AT-HS6BK headshell\u003c\/li\u003e\n\u003cli\u003eHighly rigid glass-fiber-reinforced PPS body built for DJ use\u003c\/li\u003e\n\u003cli\u003e0.6 mil bonded round-shank conical stylus with maximum tip visibility for cueing\u003c\/li\u003e\n\u003cli\u003eCarbon-fiber-reinforced ABS cantilever with nylon wire suspension\u003c\/li\u003e\n\u003cli\u003eHigh 5.5 mV output with solid tracking at 2.0-4.0 g\u003c\/li\u003e\n\u003cli\u003eCompatible with any XP or VM95 Series replacement stylus\u003c\/li\u003e\n\u003cli\u003eUniversal half-inch mount for 4-pin turntable tonearms\u003c\/li\u003e\n\u003cli\u003eIncludes installation screws (11 mm and 8 mm), washers, nuts and non-magnetic screwdriver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dual moving magnet stereo DJ cartridge with headshell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus:\u003c\/strong\u003e 0.6 mil conical, bonded round shank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Carbon-fiber-reinforced ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e Highly rigid polyphenylene sulfide (PPS) and glass fiber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 5.5 mV (1 kHz, 5 cm\/sec)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20-18,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 20 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Balance:\u003c\/strong\u003e 2.0 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 2.0-4.0 g (3.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Load:\u003c\/strong\u003e 47,000 ohms \/ 100-200 pF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Impedance:\u003c\/strong\u003e 6.7 k ohms (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Compliance:\u003c\/strong\u003e 20 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Compliance:\u003c\/strong\u003e 6.0 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne (100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Tracking Angle:\u003c\/strong\u003e 20 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Half-inch universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadshell:\u003c\/strong\u003e Supplied pre-mounted in an AT-HS6BK universal half-inch headshell for four-pin turntables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.2 g cartridge; 15.6 g with headshell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e ATN-XP3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Installation screws (11 mm x 2, 8 mm x 2), two washers, two nuts and a non-magnetic screwdriver\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":39373581091022,"sku":"4961310146573","price":95.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_082ab730-213c-49d2-a0a2-394126e4b92e.jpg?v=1617418307"},{"product_id":"cartridge-stylus-cleaner-at617a","title":"Audio-Technica - AT617a Cartridge Stylus Cleaner","description":"\u003cp\u003e\u003cstrong\u003eA polyurethane gel pad that lifts dust off the stylus with one straight-down press — no fluid, no brushing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrushes and fluids both ask you to move something against the cantilever, which is the one part of a cartridge least able to take it. The AT617a takes the opposite approach: set it under the cartridge, cue the stylus straight down onto the gel as you would onto a record, and lift straight back up. The tacky surface takes the debris with it.\u003c\/p\u003e\n\u003cp\u003eAudio-Technica says the gel stays tacky for years, and when the surface finally looks dirty you rinse it under water and let it dry — the tack comes back. There is nothing to refill and nothing to replace.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePolyurethane gel lifts dirt off the stylus tip in a single press\u003c\/li\u003e\n\u003cli\u003eNo cleaning fluid and no brushing — nothing to stress the cantilever\u003c\/li\u003e\n\u003cli\u003eGel stays tacky for years of use\u003c\/li\u003e\n\u003cli\u003eSurface washes clean under water and is reusable\u003c\/li\u003e\n\u003cli\u003eCompact 37.5 mm puck sits easily on the platter or plinth\u003c\/li\u003e\n\u003cli\u003eWorks with any moving magnet or moving coil cartridge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Polyurethane gel stylus cleaner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 37.5 mm (1.48″) diameter x 17 mm (0.67″) high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approx. 20 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumables:\u003c\/strong\u003e None — no fluid, brush or refills\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance:\u003c\/strong\u003e Rinse under water and air dry when the surface becomes dirty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Lower the stylus straight down onto the gel and lift straight up. Do not drag the stylus across the surface\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":39373581123790,"sku":"4961310145460","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_ed34a6b0-01f4-49c8-9224-68f3a46034b5.png?v=1617418310"},{"product_id":"cartridge-storage-case-at6003r","title":"Audio-Technica - AT6003R Cartridge Storage Case","description":"\u003cp\u003e\u003cstrong\u003eA three-capsule case that stores headshells with their cartridges still mounted, protected from dust and UV.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAnyone running more than one cartridge ends up with headshells sitting loose in a drawer, which is how cantilevers get bent. The AT6003R gives each one a home: the headshell seats upright on a lock-pin post in the ABS base, and a clear polycarbonate capsule drops over it.\u003c\/p\u003e\n\u003cp\u003eThe capsules do two jobs. The obvious one is keeping dust off the stylus. The less obvious one is UV protection — the suspension and the adhesive holding the stylus in place both degrade with light exposure over the years. Each capsule has a side slit that clears the headshell's finger lift so it seats fully without forcing, and the base sits on rubber feet.\u003c\/p\u003e\n\u003cp\u003eDesigned for double lock-pin type headshells. Cartridges and headshells are not included.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eStores three headshell-and-cartridge assemblies upright and ready to swap\u003c\/li\u003e\n\u003cli\u003eClear polycarbonate capsules give UV protection as well as dust protection\u003c\/li\u003e\n\u003cli\u003eSide slit in each capsule clears the headshell finger lift\u003c\/li\u003e\n\u003cli\u003eABS base with rubber feet for stability on a rack or shelf\u003c\/li\u003e\n\u003cli\u003eSuits double lock-pin type headshells\u003c\/li\u003e\n\u003cli\u003eCartridges and headshells not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e Three headshells with cartridges mounted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapsule Material:\u003c\/strong\u003e Polycarbonate resin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Material:\u003c\/strong\u003e ABS resin, with rubber feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadshell Compatibility:\u003c\/strong\u003e Double lock-pin type headshells\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Base and three clear capsules. Cartridges and headshells are not included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":39373581156558,"sku":"4961310144616","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_ef41c7bb-024c-4c43-bcde-5865e78841c3.png?v=1617418313"},{"product_id":"audio-technica-disc-stabilizer-at618a","title":"Audio-Technica - AT618a Disc Stabilizer","description":"\u003cp\u003e\u003cstrong\u003eA 600-gram machined brass record weight that couples the record to the platter and takes the edge off minor dish warps.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT618a is turned from a solid brass block and drops straight over the spindle onto the label area. Its 600 grams press the record into contact with the platter, which damps resonance in the vinyl itself and helps a mildly dished record sit flat enough for the stylus to track consistently. A rubber protector on the underside guards the label and improves grip.\u003c\/p\u003e\n\u003cp\u003eOne important caveat: this much added mass is not something every turntable's bearing and motor are built for. Audio-Technica specifically says not to use it on the AT-LP3XBT, AT-LPW30, Sound Burger, or any of its entry-level decks including the AT-LP60, AT-LP60X and AT-LP70X series. If you are running another brand, check with the manufacturer before adding 600 grams to the platter.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e600 g machined solid brass record weight\u003c\/li\u003e\n\u003cli\u003eRubber protector on the underside guards the label and improves grip\u003c\/li\u003e\n\u003cli\u003eCouples the record to the platter to reduce resonance\u003c\/li\u003e\n\u003cli\u003eHelps flatten minor dish warps for more consistent stylus contact\u003c\/li\u003e\n\u003cli\u003eDrops straight over the spindle — no threading or clamping\u003c\/li\u003e\n\u003cli\u003eCompact 80 mm body stays within the label area\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Free-standing record weight (not a threaded clamp)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 600 g (21.2 oz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 80 mm diameter x 29 mm high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Machined solid brass with rubber underside protector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant:\u003c\/strong\u003e Audio-Technica advises against use with the AT-LP3XBT, AT-LPW30, Sound Burger, and all entry-level models including the AT-LP60, AT-LP60X and AT-LP70X series. Confirm with your turntable's manufacturer that the bearing and motor can support the added mass\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":39373595738318,"sku":"4961310140083","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_5adcc6de-1858-4b72-b275-067b5cae1de1.jpg?v=1646793309"},{"product_id":"audio-technica-disc-stabilizer-at618a-1","title":"Audio-Technica - AT6006R Safety Raiser","description":"\u003cp\u003e\u003cstrong\u003eAn oil-damped tonearm lifter that raises the arm at the end of a side, so a manual turntable stops wearing the stylus in the run-out groove.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA manual turntable left to its own devices will happily circle the run-out groove all night. The AT6006R fixes that without adding electronics: it mounts on the plinth just inside the run-out area with the supplied double-sided tape, and when the tonearm reaches it, the arm brushes a sensitive release antenna that trips a hydraulic lift.\u003c\/p\u003e\n\u003cp\u003eThe lift is oil-damped, so the arm rises smoothly rather than being flicked upward. Height is set with an adjustment screw over a 27 to 39 mm range, and two spacers extend that further for taller plinths.\u003c\/p\u003e\n\u003cp\u003eAudio-Technica supports it on the AT-LP5, AT-LP5X, AT-LP7 and AT-LP7X. Other Audio-Technica models cannot take it because of where their tonearms sit; the spacers make it workable on many third-party decks, but fit depends on your arm's height and position.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatically lifts the tonearm at the end of a record\u003c\/li\u003e\n\u003cli\u003eOil-damped hydraulic lift raises the arm smoothly\u003c\/li\u003e\n\u003cli\u003eHighly sensitive release antenna triggers reliably at low tracking forces\u003c\/li\u003e\n\u003cli\u003eHeight adjustable from 27 to 39 mm, with 12 mm and 24 mm spacers for taller plinths\u003c\/li\u003e\n\u003cli\u003eCompact 14 mm diameter and about 21 g — visually unobtrusive\u003c\/li\u003e\n\u003cli\u003eAttaches with the supplied double-sided tape; no drilling or wiring\u003c\/li\u003e\n\u003cli\u003eSupported on the AT-LP5, AT-LP5X, AT-LP7 and AT-LP7X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Mechanical, oil-damped hydraulic tonearm lifter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 14 mm (0.55″)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e Adjustable 27-39 mm (1.06-1.54″), extendable with the supplied spacers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Bar Width:\u003c\/strong\u003e 3 mm (0.12″)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approx. 21 g (0.74 oz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e None required — entirely mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Turntables:\u003c\/strong\u003e AT-LP5, AT-LP5X, AT-LP7, AT-LP7X. Other Audio-Technica models cannot accommodate it due to tonearm positioning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Spacers 14 mm dia. x 12 mm and 14 mm dia. x 24 mm, double-sided tape x 4\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":40822152429774,"sku":"4961310146115","price":139.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/at6006r_01.png?v=1643072804"},{"product_id":"audio-technica-turntable-level-at615a","title":"Audio-Technica - AT615a Turntable Level","description":"\u003cp\u003e\u003cstrong\u003eA high-precision bubble level in a machined aluminum housing — the first tool to reach for when setting up a turntable.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEverything else in turntable setup assumes the platter is level. Anti-skate behaves differently on a tilted deck, tracking force reads inconsistently, and the stylus sits in the groove at an angle it was never meant to.\u003c\/p\u003e\n\u003cp\u003eThe AT615a is a bull's-eye bubble level machined from solid aluminum, so it is rigid, non-magnetic and will not mark the platter. Set it on the stationary platter, read the bubble against the ring, and adjust the feet or the shelf until it centers. Worth checking at two or three points around the platter, and again with the dust cover in its normal position.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-precision bubble level made specifically for turntable setup\u003c\/li\u003e\n\u003cli\u003eMachined solid aluminum housing — rigid, non-magnetic and won't mark the platter\u003c\/li\u003e\n\u003cli\u003eCircular bull's-eye reading shows level in both axes at once\u003c\/li\u003e\n\u003cli\u003eCompact 37 mm puck sits stably on any platter or plinth\u003c\/li\u003e\n\u003cli\u003eThe correct first step before setting tracking force, VTA and anti-skate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Bull's-eye bubble (spirit) level\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 37 mm (1.5″) diameter x 17 mm (0.7″) high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Machined solid aluminum with high-precision bubble insert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Place on the stationary platter, center the bubble by adjusting the turntable's feet or its shelf, then re-check at several points around the platter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":41537172340942,"sku":"4961310140106","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/at615a_01.png?v=1664302677"},{"product_id":"copy-of-audio-technica-turntable-level-at615a","title":"Audio-Technica - Replacement Stylus AT-VMN95E","description":"\u003cp\u003e\u003cstrong\u003eGenuine Audio-Technica AT-VMN95E replacement stylus — the 0.3 x 0.7 mil bonded elliptical from the best-selling VM95 cartridge.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn elliptical tip follows groove modulation more precisely than a conical, which improves frequency and phase response and lowers distortion. The bonded diamond rides on an aluminum cantilever.\u003c\/p\u003e\n\u003cp\u003eIt is the factory stylus for the AT-VM95E and a straightforward step up from a conical if your cartridge is an AT-VM95C. All VM95 bodies accept it. Audio-Technica rates it at roughly 300 hours.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e0.3 x 0.7 mil bonded elliptical diamond on a bonded round shank\u003c\/li\u003e\n\u003cli\u003eAluminum cantilever\u003c\/li\u003e\n\u003cli\u003eThe supplied stylus for the AT-VM95E and AT-VM95E\/H\u003c\/li\u003e\n\u003cli\u003eTracks groove modulation more accurately than a conical, with lower distortion\u003c\/li\u003e\n\u003cli\u003eInterchangeable across the VM95 family — every VM95 stylus fits every VM95 body\u003c\/li\u003e\n\u003cli\u003eRoughly 300 hours of playing life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Shape:\u003c\/strong\u003e Elliptical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Construction:\u003c\/strong\u003e Bonded round shank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Curvature Radius:\u003c\/strong\u003e 0.3 x 0.7 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied Stylus For:\u003c\/strong\u003e AT-VM95E, AT-VM95E\/H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso Fits:\u003c\/strong\u003e AT-VM95C, AT-VM95EN, AT-VM95ML, AT-VM95SH, AT-VM95SP and the \/H headshell-mounted versions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Life:\u003c\/strong\u003e Approx. 300 hours\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":41537172439246,"sku":"4961310157357","price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/at-vmn95e_01.png?v=1664302882"},{"product_id":"audio-technica-at-lpw50bt-manual-belt-drive-turntable-wireless-analog","title":"Audio-Technica - AT-LPW50BT Manual Belt-Drive Turntable (Wireless \u0026 Analog)","description":"\u003cp\u003e\u003cstrong\u003eA rosewood-veneered belt-drive beauty that plays it both ways: classic wired analog or Bluetooth wireless to your favorite speakers and headphones.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-LPW50BT is a fully manual, two-speed (33-1\/3 and 45 RPM) belt-drive turntable built on a 30 mm-thick MDF plinth with rosewood-finished veneer that helps damp low-frequency acoustic feedback. Its DC servo motor uses sensor-monitored Active Speed Stabilization to maintain accurate platter rotation, spinning a professional anti-resonance die-cast aluminum platter with rubber mat.\u003c\/p\u003e\n\u003cp\u003eA straight carbon-fiber tonearm with hydraulically damped lift control, lockable rest, adjustable tracking force and dynamic anti-skate carries the matte-silver AT-HS4 universal headshell fitted with an AT-VM95E Dual Moving Magnet cartridge (0.3 x 0.7 mil elliptical stylus, compatible with all VM95 Series replacement styli). Listen wired through the built-in switchable phono\/line preamp and included RCA cable, or pair over Bluetooth 5.2 for wireless playback to speakers and headphones up to about 33 feet away.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBelt drive with a DC servo motor and Active Speed Stabilization\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.2 output alongside the analog phono\/line connection\u003c\/li\u003e\n\u003cli\u003eStatic balanced straight carbon tonearm with hydraulically damped lift, 223.6 mm effective length\u003c\/li\u003e\n\u003cli\u003eRemovable AT-HS4 SV headshell with an AT-VM95E BK dual moving magnet cartridge\u003c\/li\u003e\n\u003cli\u003eUpgradable with any VM95 series stylus\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminum platter with rubber mat\u003c\/li\u003e\n\u003cli\u003eBuilt-in switchable phono\/line preamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Two-speed, fully manual belt drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e DC servo with Active Speed Stabilization\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 33-1\/3 and 45 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatter:\u003c\/strong\u003e Die-cast aluminum with rubber mat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTonearm:\u003c\/strong\u003e Static balanced straight carbon with hydraulically damped lift control, 223.6 mm effective length, 18.6 mm overhang, tracking force range 0-3.0 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadshell:\u003c\/strong\u003e AT-HS4 SV universal half-inch mount, removable, 8.5 g (0.30 oz) including lead wires, overhang adjustment plus or minus 5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge:\u003c\/strong\u003e AT-VM95E BK dual moving magnet, 0.3 x 0.7 mil bonded elliptical stylus, removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e AT-VMN95EBK; accepts any VM95 series stylus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWow and Flutter:\u003c\/strong\u003e Less than 0.15% WRMS at 33 RPM, 3 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio:\u003c\/strong\u003e Greater than 60 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Level:\u003c\/strong\u003e Phono 4.0 mV \/ Line 200 mV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhono Preamp Gain:\u003c\/strong\u003e 35 dB nominal, RIAA equalized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e Version 5.2, A2DP profile, 2.402-2.480 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Codec:\u003c\/strong\u003e SBC only — this model does not support aptX in any form\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Range:\u003c\/strong\u003e Approx. 33′ (10 m) line of sight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e AC 100-240 V, 50\/60 Hz, 0.5 A max via the external adapter (12 V, 1.0 A output). US operation 120 V, 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 1.8 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 16.54″ (420 mm) W x 13.39″ (340 mm) D x 4.96″ (126 mm) H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 lbs (5.5 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Dust cover with hinges, rubber mat, platter with drive belt, counterweight, AT-HS4 SV headshell with AT-VM95E BK cartridge, 45 RPM adapter, RCA audio cable (3.3′ \/ 1.0 m), AC adapter (4.9′ \/ 1.5 m)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":41537189118158,"sku":"4961310158583","price":599.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/at-lpw50bt-rw_01_1.png?v=1664304035"},{"product_id":"audio-technica-at-lpw40wn-fully-manual-belt-drive-turntable","title":"Audio-Technica - AT-LPW40WN Fully Manual Belt-Drive Turntable","description":"\u003cp\u003e\u003cstrong\u003eWarm walnut looks, a carbon-fiber tonearm and honest fully manual belt-drive playback make this an easy hi-fi centerpiece.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-LPW40WN is a fully manual, two-speed (33-1\/3 and 45 RPM) belt-drive turntable with an anti-resonance plinth wrapped in simulated walnut wood veneer, giving it vintage warmth with modern engineering underneath. A DC servo motor with active speed stabilization keeps the anti-resonance die-cast aluminum platter (with rubber mat) rotating at accurate, consistent speed.\u003c\/p\u003e\n\u003cp\u003eIts straight carbon-fiber tonearm features hydraulically damped lift control and adjustable dynamic anti-skate, and comes fitted with the AT-VM95E Dual Moving Magnet cartridge with a replaceable elliptical stylus, upgradeable with any VM95 Series stylus. A switchable built-in phono preamp (35 dB nominal, RIAA equalized) lets you connect directly to powered speakers or a line-level input, or bypass it and run into your own phono stage.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBelt drive with a DC servo motor and Active Speed Stabilization\u003c\/li\u003e\n\u003cli\u003eWalnut veneer plinth\u003c\/li\u003e\n\u003cli\u003eStatic balanced straight carbon tonearm with hydraulically damped lift, 223.6 mm effective length\u003c\/li\u003e\n\u003cli\u003eRemovable AT-HS4 headshell with an AT-VM95E dual moving magnet cartridge\u003c\/li\u003e\n\u003cli\u003eUpgradable with any VM95 series stylus\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminum platter\u003c\/li\u003e\n\u003cli\u003eBuilt-in switchable phono\/line preamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Two-speed, fully manual belt drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e DC servo with Active Speed Stabilization\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 33-1\/3 and 45 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatter:\u003c\/strong\u003e Die-cast aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTonearm:\u003c\/strong\u003e Static balanced straight carbon with hydraulically damped lift control, 223.6 mm effective length, 18.6 mm overhang\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadshell:\u003c\/strong\u003e AT-HS4 universal half-inch mount, removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge:\u003c\/strong\u003e AT-VM95E dual moving magnet, 0.3 x 0.7 mil bonded elliptical stylus, removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e AT-VMN95E; accepts any VM95 series stylus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWow and Flutter:\u003c\/strong\u003e Less than 0.15% (weighted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio:\u003c\/strong\u003e Greater than 60 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhono Preamp Gain:\u003c\/strong\u003e 35 dB nominal, RIAA equalized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e AC 100-240 V, 50\/60 Hz, 0.5 A max via the external adapter. US operation 120 V, 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 1.1 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 17.13″ (435 mm) W x 13.90″ (353 mm) D x 5.04″ (128 mm) H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.4 lbs (4.7 kg) without dust cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Dust cover with hinges, platter, mat, drive belt, counterweight, AT-HS4 headshell with AT-VM95E cartridge, 45 RPM adapter, RCA audio cable, AC adapter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":41537194787022,"sku":"4961310146160","price":479.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/at-lpw40wn_01.png?v=1664304326"},{"product_id":"copy-of-audio-technica-at6006r-safety-raiser","title":"Audio-Technica - AT6181DL Stroboscope Disc and Quartz Strobe Light","description":"\u003cp\u003e\u003cstrong\u003eA stroboscope disc paired with a quartz-controlled strobe light, so platter speed can be checked accurately regardless of what your mains or your lighting is doing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost strobe discs rely on the flicker of an incandescent lamp running off the mains, which means the disc has to be printed for a specific line frequency and read under the right kind of bulb. The AT6181DL sidesteps all of that. Its light is battery-powered and quartz-controlled, flashing at a fixed 120 Hz for 33-1\/3 and 45 RPM and 234 Hz for 78 RPM from its own internal reference.\u003c\/p\u003e\n\u003cp\u003eThe practical consequence is that there is no 50 Hz or 60 Hz row to choose, no wrong-region version to buy, and no need for a particular light fixture in the room. Put the 104 mm disc on the platter, start it at your target speed, shine the yellow LED on it and read the row for that speed: pattern standing still means the speed is correct, drifting forward means fast, drifting back means slow.\u003c\/p\u003e\n\u003cp\u003eAn overhang guide is printed on the same disc. The light runs about eight hours continuously on two AAA cells, which are not included.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eComplete kit: stroboscope disc plus a quartz-controlled LED strobe light\u003c\/li\u003e\n\u003cli\u003eChecks 33-1\/3, 45 and 78 RPM platter speed\u003c\/li\u003e\n\u003cli\u003eQuartz reference makes the reading independent of AC mains frequency — no 50\/60 Hz version to get wrong\u003c\/li\u003e\n\u003cli\u003eBright yellow LED gives a high-contrast, easy-to-read pattern\u003c\/li\u003e\n\u003cli\u003eFlashes at 120 Hz for 33-1\/3 and 45 RPM, and 234 Hz for 78 RPM\u003c\/li\u003e\n\u003cli\u003eAbout eight hours of continuous use on two AAA cells\u003c\/li\u003e\n\u003cli\u003eStylus overhang guide printed on the same disc\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds Marked:\u003c\/strong\u003e 33-1\/3, 45 and 78 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Diameter:\u003c\/strong\u003e 104 mm (4.09″)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Weight:\u003c\/strong\u003e 35 g (1.23 oz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrobe Flash Frequency:\u003c\/strong\u003e 120 Hz for 33-1\/3 and 45 RPM; 234 Hz for 78 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrobe Emitter:\u003c\/strong\u003e Yellow LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrobe Power:\u003c\/strong\u003e Two AAA batteries, alkaline or nickel-metal-hydride, DC 3 V. Batteries not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrobe Battery Life:\u003c\/strong\u003e Approx. 8 hours continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrobe Dimensions:\u003c\/strong\u003e 32 mm W x 19 mm D x 115 mm H (1.26 x 0.75 x 4.53″)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrobe Weight:\u003c\/strong\u003e 35 g (1.23 oz), excluding batteries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMains Frequency:\u003c\/strong\u003e Not applicable — the supplied light is quartz-controlled and battery-powered, so the disc reads identically on 60 Hz and 50 Hz mains\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Stroboscope disc and quartz strobe light\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":41776160243918,"sku":"4961310145682","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/at6181dl_01.png?v=1675210076"},{"product_id":"audio-technica-at-art20-dual-moving-coil-stereo-cartridge","title":"Audio-Technica - AT-ART20 Dual Moving Coil Stereo Cartridge","description":"\u003cp\u003e\u003cstrong\u003eAudio-Technica's top magnetic-core moving coil cartridge pairs a boron cantilever and line contact stylus with a precision-machined titanium body.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-ART20 is designed to reproduce sound with the full expressiveness of the original recording — extended high-frequency detail, a clear and controlled low end, and spatial imaging that conveys the original performance environment. Building on the AT-ART9XI's magnetic-core dual moving coil design, the front yoke is 0.6 mm thicker to improve magnetic flux density, delivering more than 15% higher output voltage without adding coil turns and their associated mass and impedance penalties.\u003c\/p\u003e\n\u003cp\u003eA special line contact nude diamond stylus is mounted on a 0.28 mm solid boron cantilever with a rectangular shank and titanium tip reinforcement plate that reduces mass while maintaining precise alignment; a stepped pipe structure connecting cantilever and armature increases rigidity for improved transient response. The body combines an aluminum base, titanium housing, and elastomer undercover — the titanium precision-machined using techniques from Sabae, Japan's famed eyeglass industry — and gold-plated terminal pins roughly 30 times thicker than conventional plating reduce contact resistance. The AT-ART20 carries Audio-Technica's Excellence Product designation.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMagnetic-core dual moving coil design with 0.6 mm thicker front yoke for over 15% higher output\u003c\/li\u003e\n\u003cli\u003eSpecial line contact nude diamond stylus (1.5 x 0.28 mil)\u003c\/li\u003e\n\u003cli\u003e0.28 mm solid boron cantilever with titanium tip reinforcement plate\u003c\/li\u003e\n\u003cli\u003eStepped pipe cantilever\/armature joint for greater rigidity and transient response\u003c\/li\u003e\n\u003cli\u003ePrecision-machined titanium housing with aluminum base and elastomer undercover\u003c\/li\u003e\n\u003cli\u003eGold-plated terminal pins approximately 30 times thicker than conventional products\u003c\/li\u003e\n\u003cli\u003eAudio-Technica Excellence Product designation\u003c\/li\u003e\n\u003cli\u003eFee-based Moving Coil Exchange Program available for servicing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dual moving coil (magnetic core)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus:\u003c\/strong\u003e Special line contact, nude diamond, 1.5 x 0.28 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e 0.28 mm solid boron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Circuit:\u003c\/strong\u003e Front yoke 0.6 mm thicker than the AT-ART9XI for improved magnetic flux density\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e Aluminum base with titanium housing and elastomer undercover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 0.55 mV (1 kHz, 5 cm\/sec)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20 - 50,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 30 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Balance:\u003c\/strong\u003e 0.5 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.6 - 2.0 g (1.8 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Load Impedance:\u003c\/strong\u003e 100 ohms minimum (with head amplifier)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Impedance:\u003c\/strong\u003e 12 ohms (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance:\u003c\/strong\u003e 12 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Inductance:\u003c\/strong\u003e 25 µH (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Compliance:\u003c\/strong\u003e 23 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Compliance:\u003c\/strong\u003e 13 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne (100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Tracking Angle:\u003c\/strong\u003e 20 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Half-inch standard mount, threaded M2.6 x 2 — two screws, no nuts required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.0 g (0.32 oz)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42042262225102,"sku":"4961310156916","price":3199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-art20_01_1.png?v=1683844836"},{"product_id":"audio-technica-at-art9xa-dual-mc-phono-cartridge","title":"Audio-Technica - AT-ART9XA Dual MC Phono Cartridge","description":"\u003cp\u003e\u003cstrong\u003eA non-magnetic-core moving coil design that eliminates magnetic distortion for natural timbre and a precise sound field.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-ART9XA is part of Audio-Technica's ART (Audio-Technica Reference Transducer) series and carries the company's Excellence Product designation for meeting its highest high-fidelity performance standards. Its dual moving coils are wound from high-performance PCOCC (Pure Copper by Ohno Continuous Casting) wire and arranged in an inverted-V configuration on a non-magnetic core — a design that eliminates magnetic distortion to deliver natural timbre, high channel separation and extended frequency response.\u003c\/p\u003e\n\u003cp\u003eGroove tracing is handled by a Shibata stylus mounted on a 0.28 mm solid boron cantilever for accurate reproduction from the high frequencies down through the mid and low ranges. With its 0.2 mV output, the AT-ART9XA is intended for use with high-gain moving coil phono stages or step-up transformers.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNon-magnetic-core dual moving coil design eliminates magnetic distortion\u003c\/li\u003e\n\u003cli\u003eCoils wound with high-performance PCOCC wire in an inverted-V configuration\u003c\/li\u003e\n\u003cli\u003eShibata stylus for detailed high-frequency retrieval\u003c\/li\u003e\n\u003cli\u003e0.28 mm solid boron cantilever\u003c\/li\u003e\n\u003cli\u003eHigh channel separation (30 dB at 1 kHz) and 20-50,000 Hz response\u003c\/li\u003e\n\u003cli\u003eHalf-inch mounting with threaded holes for easy installation\u003c\/li\u003e\n\u003cli\u003eAudio-Technica Excellence Product designation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dual moving coil (non-magnetic core)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus:\u003c\/strong\u003e Shibata\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e 0.28 mm solid boron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Wire:\u003c\/strong\u003e PCOCC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet and Yoke:\u003c\/strong\u003e Neodymium magnet with permendur yoke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e Machined aluminum and high-rigidity plastic hybrid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 0.2 mV (1 kHz, 5 cm\/sec)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20-50,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 30 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Balance:\u003c\/strong\u003e 0.5 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.6-2.0 g (1.8 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Load Impedance:\u003c\/strong\u003e 100 ohms minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Impedance:\u003c\/strong\u003e 12 ohms (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance:\u003c\/strong\u003e 12 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Inductance:\u003c\/strong\u003e 2.5 µH (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Compliance:\u003c\/strong\u003e 20 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Compliance:\u003c\/strong\u003e 10 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne (100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Tracking Angle:\u003c\/strong\u003e 20 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Half-inch standard mount, threaded M2.6 x 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.5 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42042263666894,"sku":"4961310153984","price":1699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/AATMCART9XA__09766.webp?v=1683844953"},{"product_id":"audio-technica-vm740ml-dual-moving-magnet-cartridge","title":"Audio-Technica - VM740ML Dual Moving Magnet Cartridge","description":"\u003cp\u003e\u003cstrong\u003eThe MicroLine-equipped standout of Audio-Technica's original VM700 Series, built to pull detail out of the groove that elliptical styli simply glide past.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe VM740ML belongs to Audio-Technica's VM line, a range that harks back to A-T's early days as a manufacturer primarily of high-end phono cartridges while incorporating today's advanced technology. Its dual moving magnet design places two magnets to match the left and right channels cut into the record groove, paired with paratoroidal coils for improved generating efficiency and a center shield plate between channels to reduce crosstalk. This is the previous-generation VM700 Series model, since succeeded by the current AT-VM740xML refresh.\u003c\/p\u003e\n\u003cp\u003eIts 2.2 x 0.12 mil MicroLine stylus, in nude square-shank construction, traces the record groove with incredible accuracy and rides on an aluminum tapered pipe cantilever. The die-cast aluminum alloy housing reduces vibration and provides shielding, and the stylus is user-replaceable when the time comes.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2.2 x 0.12 mil MicroLine stylus with nude square shank construction\u003c\/li\u003e\n\u003cli\u003eAluminum tapered pipe cantilever\u003c\/li\u003e\n\u003cli\u003eDual magnets positioned to match the stereo channels in the record groove\u003c\/li\u003e\n\u003cli\u003eParatoroidal coils for improved generating efficiency\u003c\/li\u003e\n\u003cli\u003eCenter shield plate between channels reduces crosstalk\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminum alloy housing reduces vibration\u003c\/li\u003e\n\u003cli\u003eHalf-inch mount with installation hardware included\u003c\/li\u003e\n\u003cli\u003eUser-replaceable stylus (VMN40ML)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e VM dual moving magnet stereo cartridge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus:\u003c\/strong\u003e 2.2 x 0.12 mil MicroLine, nude square shank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Aluminum tapered pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Wire:\u003c\/strong\u003e 6N oxygen-free copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e Die-cast aluminum alloy housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 4.0 mV (1 kHz, 5 cm\/sec)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20-27,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 28 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Balance:\u003c\/strong\u003e 1.0 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Load:\u003c\/strong\u003e 47,000 ohms \/ 100-200 pF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Impedance:\u003c\/strong\u003e 2,700 ohms (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Inductance:\u003c\/strong\u003e 460 mH (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance:\u003c\/strong\u003e 800 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Compliance:\u003c\/strong\u003e 40 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Compliance:\u003c\/strong\u003e 10 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne (100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Tracking Angle:\u003c\/strong\u003e 23 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Half-inch standard mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.0 g (0.3 oz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e VMN40ML\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Replacement Stylus:\u003c\/strong\u003e Audio-Technica now lists the AT-VMN40xML (tapered aluminum cantilever) and AT-VMN45xML (solid boron cantilever) as fitting this body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Installation screws (5 mm x 2, 10 mm x 2), two washers, two hexagon nuts, non-magnetic screwdriver, brush and lead wire set\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42087319535822,"sku":"4961310137571","price":349.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/vm740ml_01.png?v=1687994856"},{"product_id":"audio-technica-vm760slc-dual-moving-magnet-cartridge","title":"Audio-Technica - VM760SLC Dual Moving Magnet Cartridge","description":"\u003cp\u003e\u003cstrong\u003eThe flagship of Audio-Technica's original VM700 Series, wearing a Special Line Contact stylus that traces the groove with surgical precision and minimal record wear.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe VM760SLC sits at the top of Audio-Technica's VM line, a range that harks back to A-T's early days as a manufacturer primarily of high-end phono cartridges while incorporating modern technology. Its dual moving magnet design places two magnets to match the left and right channels of the stereo record groove, with paratoroidal coils and a center shield plate between channels to reduce crosstalk. This is the previous-generation VM700 Series flagship, since succeeded by the current AT-VM760xSL refresh.\u003c\/p\u003e\n\u003cp\u003eIts ultra-lightweight 1.5 x 0.28 mil Special Line Contact stylus, in nude rectangular-shank construction, allows the cartridge to trace the record groove with incredible accuracy and minimum abrasion, extending frequency response to 30,000 Hz. The stylus rides on an aluminum tapered pipe cantilever, and the die-cast aluminum alloy housing reduces vibration and provides shielding.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1.5 x 0.28 mil Special Line Contact stylus, nude rectangular shank\u003c\/li\u003e\n\u003cli\u003eAluminum tapered pipe cantilever\u003c\/li\u003e\n\u003cli\u003eDual magnets positioned to match the stereo channels in the record groove\u003c\/li\u003e\n\u003cli\u003eParatoroidal coils for high generating efficiency\u003c\/li\u003e\n\u003cli\u003eCenter shield plate between channels reduces crosstalk\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminum alloy housing reduces vibration\u003c\/li\u003e\n\u003cli\u003eHalf-inch mount with installation hardware and accessories included\u003c\/li\u003e\n\u003cli\u003eUser-replaceable stylus (VMN60SLC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e VM dual moving magnet stereo cartridge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus:\u003c\/strong\u003e 1.5 x 0.28 mil Special Line Contact, nude rectangular shank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Aluminum tapered pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Wire:\u003c\/strong\u003e 6N oxygen-free copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e Die-cast aluminum alloy housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 4.0 mV (1 kHz, 5 cm\/sec)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20-30,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 30 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Balance:\u003c\/strong\u003e 1.0 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Load:\u003c\/strong\u003e 47,000 ohms \/ 100-200 pF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Impedance:\u003c\/strong\u003e 2,700 ohms (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Inductance:\u003c\/strong\u003e 460 mH (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance:\u003c\/strong\u003e 800 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Compliance:\u003c\/strong\u003e 40 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Compliance:\u003c\/strong\u003e 10 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne (100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Tracking Angle:\u003c\/strong\u003e 23 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Half-inch standard mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.0 g (0.3 oz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e VMN60SLC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Replacement Stylus:\u003c\/strong\u003e Audio-Technica now lists the AT-VMN60xSL as fitting this body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Installation screws (5 mm x 2, 10 mm x 2), two washers, two hexagon nuts, non-magnetic screwdriver, brush and lead wire set\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42087322255566,"sku":"4961310137595","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/vm760slc_01.png?v=1687995132"},{"product_id":"audio-technica-at-vmn95ml-replacement-stylus","title":"Audio-Technica - AT-VM95ML Dual Moving Magnet Cartridge","description":"\u003cp\u003e\u003cstrong\u003eThe overachiever of the VM95 line — a nude MicroLinear stylus at a price that punches far above its class.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-VM95ML is built on Audio-Technica's VM dual magnet design, which positions two magnets in a V shape to match the left and right channels cut into the record groove, delivering excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts, so the cartridge mounts to any half-inch headshell with just two screws — no nuts required.\u003c\/p\u003e\n\u003cp\u003eWhat sets the VM95ML apart is its 2.2 x 0.12 mil MicroLinear stylus with nude square-shank construction on an aluminum pipe cantilever. The MicroLinear tip traces the groove more accurately than the conical and elliptical styli found lower in the VM95 range, retrieving high-frequency detail while reducing distortion and record wear. And because every VM95 body accepts any AT-VMN95 replacement stylus, you can move up or down the series without ever re-mounting a cartridge.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2.2 x 0.12 mil MicroLinear stylus with nude square-shank construction\u003c\/li\u003e\n\u003cli\u003eVM dual magnet design for excellent channel separation and low distortion\u003c\/li\u003e\n\u003cli\u003eAluminum pipe cantilever\u003c\/li\u003e\n\u003cli\u003eDurable, low-resonance polymer housing\u003c\/li\u003e\n\u003cli\u003eThreaded inserts allow easy two-screw mounting — no nuts required\u003c\/li\u003e\n\u003cli\u003eCompatible with any AT-VMN95 Series replacement stylus\u003c\/li\u003e\n\u003cli\u003eHalf-inch mount fits standard headshells\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e VM Series dual magnet stereo cartridge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus:\u003c\/strong\u003e 2.2 x 0.12 mil MicroLinear, nude square shank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Aluminum pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Wire:\u003c\/strong\u003e Tough pitch copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e Durable low-resonance polymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 3.5 mV (1 kHz, 5 cm\/sec)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20-25,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 23 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Balance:\u003c\/strong\u003e 1.5 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Load:\u003c\/strong\u003e 47,000 ohms \/ 100-200 pF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Impedance:\u003c\/strong\u003e 3.3 k ohms (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Inductance:\u003c\/strong\u003e 550 mH (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance:\u003c\/strong\u003e 485 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Compliance:\u003c\/strong\u003e 20 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Compliance:\u003c\/strong\u003e 10 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne (100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Tracking Angle:\u003c\/strong\u003e 23 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Half-inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.1 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e AT-VMN95ML\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Installation screws (11 mm x 2, 8 mm x 2), two washers and a non-magnetic screwdriver\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42087323730126,"sku":"4961310145996","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-vm95ml_01_png.webp?v=1708111909"},{"product_id":"audio-technica-at-hs10bk-universal-headshell","title":"Audio-Technica - AT-HS10BK Universal Headshell","description":"\u003cp\u003e\u003cstrong\u003eA lightweight aluminum die-cast headshell for standard half-inch, four-pin cartridges.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-HS10BK uses a universal H-4 bayonet connector, so it drops into any S-shaped or J-shaped tonearm built to that standard — Audio-Technica specifically lists the AT-LP120-USB and AT-LP1240-USB. The die-cast aluminum body is chosen to keep vibration to a minimum without adding mass.\u003c\/p\u003e\n\u003cp\u003eIts finger lift sits well forward for precise cueing, and the cartridge mounts in slotted through-holes so you can slide it fore and aft to set overhang. Gold-plated lead wires and all the mounting hardware are in the box, so it is ready for a cartridge straight away.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal half-inch mount for standard four-pin cartridges\u003c\/li\u003e\n\u003cli\u003eUniversal H-4 bayonet connector for S-shaped and J-shaped tonearms\u003c\/li\u003e\n\u003cli\u003eAluminum die-cast body keeps vibration to a minimum\u003c\/li\u003e\n\u003cli\u003e10.0 g bare weight suits medium- and high-compliance cartridges\u003c\/li\u003e\n\u003cli\u003eForward-set finger lift for precise stylus placement\u003c\/li\u003e\n\u003cli\u003eSlotted through-holes allow sliding overhang adjustment\u003c\/li\u003e\n\u003cli\u003eGold-plated lead wires and mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Universal half-inch (four-pin), H-4 bayonet connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Size:\u003c\/strong\u003e 8 mm dia. x 12 mm long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Aluminum die-cast; aluminum connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.0 g (0.4 oz), excluding lead wires\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 0.5″ (13.7 mm) H x 0.8″ (21.0 mm) W x 2.0″ (52.0 mm) D, excluding connector and protrusions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge Mounting:\u003c\/strong\u003e Non-threaded slotted through-holes with sliding fore\/aft adjustment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Wires:\u003c\/strong\u003e Included, gold-plated contacts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Tonearms using the universal H-4 bayonet collar; Audio-Technica lists AT-LP120-USB and AT-LP1240-USB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 16 mm screws x 2, 10 mm screws x 2, nuts x 2, plastic washers x 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso Available:\u003c\/strong\u003e AT-HS10SV in silver\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42087325171918,"sku":"4961310132026","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-hs10bk_01.png?v=1687995639"},{"product_id":"audio-technica-at-sb727-sound-burger-portable-bluetooth-turntable","title":"Audio-Technica - AT-SB727 Sound Burger - Portable Bluetooth Turntable","description":"\u003cp\u003e\u003cstrong\u003eThe legendary 1980s portable turntable is back — now with Bluetooth and a 12-hour battery.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Sound Burger has been a fan favorite since the 1980s thanks to its nostalgic design, quirky advertising campaigns, and unique listening experience. Audio-Technica brought it back in 2022 as a limited-edition red model for the company's 60th anniversary — and it sold out globally within days. By popular demand, the Sound Burger has now rejoined the regular lineup, pairing its retro clamshell aesthetic with thoroughly modern updates.\u003c\/p\u003e\n\u003cp\u003eThe AT-SB727 plays 33-1\/3 and 45 RPM records with a belt-drive system powered by a high-precision DC motor, a dynamic balance tonearm with spring-applied stylus pressure, and a die-cast aluminum alloy platter with damping design. Stream wirelessly over Bluetooth 5.2 for up to 12 hours per USB-C charge, or connect wired with the included 3.5mm-to-RCA cable. The diamond stylus is replaceable, making it ideal for parties, compact living spaces, or picnics.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePortable belt-drive turntable that plays a record anywhere, with no mains connection\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.2 with A2DP and AVRCP, SBC codec\u003c\/li\u003e\n\u003cli\u003eAbout 12 hours of playback from the internal lithium-ion battery\u003c\/li\u003e\n\u003cli\u003eTwo speeds, 33-1\/3 and 45 RPM\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminum alloy platter with a damping design\u003c\/li\u003e\n\u003cli\u003eBuilt-in phono preamp with a fixed 150 mV line-level output\u003c\/li\u003e\n\u003cli\u003eCharges over USB Type-C; charging cable, audio cable and 45 adapter included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Belt-drive portable turntable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e DC servo motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 33-1\/3 and 45 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatter:\u003c\/strong\u003e Die-cast aluminum alloy with damping design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge:\u003c\/strong\u003e Integral VM type — Audio-Technica publishes no model number\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e ATN3600LC (Audio-Technica's current retail part; the owner's manual lists the ATN3600L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWow and Flutter:\u003c\/strong\u003e Less than 0.25% (WTD) at 3 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio:\u003c\/strong\u003e Greater than 50 dB (DIN-B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Level:\u003c\/strong\u003e 150 mV nominal at 1 kHz, 5 cm\/sec — line level only, with no phono\/line switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhono Preamp Gain:\u003c\/strong\u003e 36 dB nominal, RIAA equalized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e Version 5.2, A2DP and AVRCP profiles, 2.402-2.480 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Codec:\u003c\/strong\u003e SBC only — no aptX support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Range:\u003c\/strong\u003e Approx. 33′ (10 m) line of sight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 3.6 V lithium-ion; approx. 12 hours of operation, approx. 12 hours to charge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging:\u003c\/strong\u003e USB Type-C at 5 V, 0.5 A. The USB-C port is for charging only and is not a digital audio output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.9″ (100 mm) W x 11″ (290 mm) D x 2.8″ (70 mm) H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approx. 2 lbs (900 g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e USB-A to USB-C charging cable (4.9′ \/ 1.5 m), 3.5 mm to dual RCA audio cable, 45 RPM adapter. No AC adapter, dust cover or felt mat\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Yellow","offer_id":42187346346190,"sku":"4961310160036","price":199.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":42187346313422,"sku":"4961310160029","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/audio-technica-at-sb2022-soundburger-black2_2400x2400_jpg.webp?v=1689713278"},{"product_id":"copy-of-technics-bookshelf-speaker-system-sb-c600-k","title":"Audio-Technica - Bluetooth Wireless Speaker - AT-SP65XBT","description":"\u003cp\u003e\u003cstrong\u003eA portable Bluetooth stereo speaker with about twelve hours of battery life and a 3.5 mm input for wired sources.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth channels of the AT-SP65XBT live in one enclosure: two 73 mm full-range drivers plus a passive radiator, driven at 6 watts per side for 12 watts total. Audio-Technica publishes a frequency response of 90 Hz to 18 kHz.\u003c\/p\u003e\n\u003cp\u003eIt pairs over Bluetooth 5.0 with A2DP, AVRCP and HFP, so it works with a Bluetooth turntable as readily as with a phone, and a built-in omnidirectional microphone handles hands-free calls. A 3.5 mm stereo input on the back covers anything wired.\u003c\/p\u003e\n\u003cp\u003eThe lithium polymer battery runs up to twelve hours of continuous playback and recharges in about three hours over USB-C. The supplied cable is USB-A to USB-C; there is no wall adapter in the box.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePortable Bluetooth stereo speaker with two 73 mm (2.87″) full-range drivers and a passive radiator\u003c\/li\u003e\n\u003cli\u003e12 W total output, 6 W per channel\u003c\/li\u003e\n\u003cli\u003eUp to 12 hours of continuous playback on a 3-hour charge\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.0 with A2DP, AVRCP and HFP — pairs with Bluetooth turntables as well as phones\u003c\/li\u003e\n\u003cli\u003eBuilt-in omnidirectional microphone for hands-free calls\u003c\/li\u003e\n\u003cli\u003e3.5 mm stereo input on the rear for wired sources\u003c\/li\u003e\n\u003cli\u003eCharges over USB-C using the supplied USB-A to USB-C cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Portable Bluetooth stereo speaker, single enclosure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrivers:\u003c\/strong\u003e 73 mm (2.87″) full range x 2, plus one passive radiator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Output:\u003c\/strong\u003e 12 W (6 W + 6 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 90 to 18,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e Bluetooth; 3.5 mm stereo mini-jack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Version:\u003c\/strong\u003e 5.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Profiles:\u003c\/strong\u003e A2DP, AVRCP, HFP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Codec:\u003c\/strong\u003e SBC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Sample Rates:\u003c\/strong\u003e 44.1 kHz and 48 kHz at 16 bit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Range:\u003c\/strong\u003e Approx. 33′ (10 m) line of sight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrophone:\u003c\/strong\u003e Built-in omnidirectional electret condenser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e Lithium polymer; up to approx. 12 hours continuous playback\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging:\u003c\/strong\u003e Approx. 3 hours via USB Type-C. No AC adapter included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 10.63″ (270 mm) W x 4.13″ (105 mm) D x 4.45″ (113 mm) H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.13 lbs (1.42 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e 41 to 104°F (5 to 40°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e USB-A to USB-C charging cable (3.3′ \/ 1 m), 3.5 mm audio cable (2′ \/ 0.6 m)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42326360195278,"sku":"042005210619","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-lp60xspbt_06_1_1.webp?v=1703702922"},{"product_id":"audio-technica-at-lp3xbt-fully-automatic-belt-drive-turntable-black","title":"Audio-Technica - AT-LP3XBT Fully Automatic Belt-Drive Turntable - Black","description":"\u003cp\u003e\u003cstrong\u003eSixty years of high-fidelity design meets the latest Bluetooth technology in a step-up automatic deck.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-LP3XBT merges Audio-Technica's 60 years of high-fidelity design with the latest Bluetooth wireless technology. This fully automatic belt-drive turntable streams your records over Bluetooth 5.2 with support for Qualcomm aptX Adaptive and aptX codecs, or connects the traditional way through its built-in switchable phono\/line preamp and included RCA cables.\u003c\/p\u003e\n\u003cp\u003eUnlike most automatic decks, the LP3XBT is built for upgrades: its AT-VM95C Dual Moving Magnet cartridge is mounted on a removable AT-HS3 universal headshell and is compatible with all VM95 Series replacement styli, so you can swap styli — or entire cartridges — as your system evolves. A balanced tonearm with hydraulically damped lift control, a die-cast aluminum platter with felt mat, and damped base construction keep vibration and resonance in check.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFully automatic belt drive with Bluetooth output\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.2 with Qualcomm aptX Adaptive, aptX and SBC codecs\u003c\/li\u003e\n\u003cli\u003eStatic balanced straight tonearm with hydraulically damped lift, 221.5 mm effective length\u003c\/li\u003e\n\u003cli\u003eRemovable AT-HS3 BK headshell carrying an AT-VM95C dual moving magnet cartridge\u003c\/li\u003e\n\u003cli\u003eUpgradable with any VM95 series stylus\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminum platter and adjustable counterweight\u003c\/li\u003e\n\u003cli\u003eDust cover with hinges, felt mat, 45 RPM adapter and cables included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Belt drive, fully automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e DC motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 33-1\/3 and 45 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatter:\u003c\/strong\u003e Die-cast aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTonearm:\u003c\/strong\u003e Static balanced straight tonearm with hydraulically damped lift control, 221.5 mm effective length, 19 mm overhang\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadshell:\u003c\/strong\u003e AT-HS3 BK universal half-inch mount, removable, 11.1 g (0.39 oz) including lead wires\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge:\u003c\/strong\u003e AT-VM95C dual moving magnet, 0.6 mil bonded conical stylus, removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e AT-VMN95C; accepts any VM95 series stylus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWow and Flutter:\u003c\/strong\u003e Less than 0.2% WRMS at 33 RPM, 3 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio:\u003c\/strong\u003e Greater than 60 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Level:\u003c\/strong\u003e Phono 4.0 mV \/ Line 252 mV nominal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhono Preamp Gain:\u003c\/strong\u003e 36 dB nominal, RIAA equalized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e Version 5.2, A2DP profile, 2.402-2.480 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Codecs:\u003c\/strong\u003e Qualcomm aptX Adaptive, Qualcomm aptX and SBC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Range:\u003c\/strong\u003e Approx. 33′ (10 m) line of sight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e AC 100-240 V, 50\/60 Hz, 0.6 A max via the external adapter (12 V, 0.5 A output). US operation 120 V, 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 2 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 17.15″ (435.6 mm) W x 14.72″ (374 mm) D x 5.04″ (128 mm) H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11 lbs (5.0 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Dust cover with hinges, felt mat, platter with drive belt, counterweight, AT-HS3 BK headshell with AT-VM95C cartridge, 45 RPM adapter, RCA audio cable (3.3′ \/ 1.0 m), AC adapter (4.9′ \/ 1.5 m)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42326373335246,"sku":"4961310156770","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-lp3xbt_bk_01_1.webp?v=1703704651"},{"product_id":"audio-technica-vm95sh-dual-moving-magnet-stereo-cartridge","title":"Audio-Technica - VM95SH Dual Moving Magnet Stereo Cartridge","description":"\u003cp\u003e\u003cstrong\u003eThe flagship of the VM95 Series — a nude Shibata stylus that pulls maximum detail out of every groove.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-VM95SH sits at the top of Audio-Technica's VM95 range, built on the company's VM dual magnet design: two magnets arranged in a V shape to match the left and right channels cut into the record groove, giving excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance polymer housing features threaded inserts for simple two-screw mounting on any half-inch headshell — no nuts required.\u003c\/p\u003e\n\u003cp\u003eIts 2.7 x 0.26 mil Shibata stylus uses nude square-shank construction on an aluminum pipe cantilever. The Shibata's slender line-contact profile rides deeper and truer in the groove than conical or elliptical tips, resolving fine high-frequency information while spreading contact pressure to be gentle on your records. As with every VM95 body, it accepts any AT-VMN95 replacement stylus, so upgrading or swapping profiles never means re-mounting a cartridge.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2.7 x 0.26 mil Shibata stylus with nude square-shank construction\u003c\/li\u003e\n\u003cli\u003eVM dual magnet design for excellent channel separation and low distortion\u003c\/li\u003e\n\u003cli\u003eAluminum pipe cantilever\u003c\/li\u003e\n\u003cli\u003eDurable, low-resonance polymer housing\u003c\/li\u003e\n\u003cli\u003eThreaded inserts allow easy two-screw mounting — no nuts required\u003c\/li\u003e\n\u003cli\u003eCompatible with any AT-VMN95 Series replacement stylus\u003c\/li\u003e\n\u003cli\u003eHalf-inch mount fits standard headshells\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e VM Series dual magnet stereo cartridge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus:\u003c\/strong\u003e 2.7 x 0.26 mil Shibata, nude square shank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Aluminum pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Wire:\u003c\/strong\u003e Tough pitch copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e Durable low-resonance polymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 3.5 mV (1 kHz, 5 cm\/sec)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20-25,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 23 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Balance:\u003c\/strong\u003e 1.5 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Load:\u003c\/strong\u003e 47,000 ohms \/ 100-200 pF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Impedance:\u003c\/strong\u003e 3.3 k ohms (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Inductance:\u003c\/strong\u003e 550 mH (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance:\u003c\/strong\u003e 485 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Compliance:\u003c\/strong\u003e 20 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Compliance:\u003c\/strong\u003e 10 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne (100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Tracking Angle:\u003c\/strong\u003e 23 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Half-inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.1 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e AT-VMN95SH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Installation screws (11 mm x 2, 8 mm x 2), two washers and a non-magnetic screwdriver\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42331717894350,"sku":"4961310145989","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-vm95sh_01.webp?v=1704245712"},{"product_id":"audio-technica-at-art1000-direct-power-stereo-mc-cartridge","title":"Audio-Technica - AT-ART1000 Direct Power Stereo MC Cartridge","description":"\u003cp\u003e\u003cstrong\u003eAudio-Technica's handmade Direct Power flagship places the moving coils directly on the stylus tip for unsurpassed transient response.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-ART1000 (ART stands for Audio-Technica Reference Transducer) is the product of more than 60 years of cartridge design, featuring an innovative audiophile design heretofore unseen in mass-produced cartridges. Its defining Direct Power System mounts the dual moving coils directly on top of the stylus tip, eliminating the negative effects that cantilever length and material impose on the signal, so subtle groove details are reproduced with striking vividness.\u003c\/p\u003e\n\u003cp\u003eEach coil is hand-wound from 20-micron PCOCC (Pure Copper by Ohno Continuous Casting) wire in an eight-turn, 0.9 mm diameter non-magnetic-core configuration, working within a 0.6 mm magnetic gap energized by a powerful neodymium magnet. A special line contact stylus on a 0.26 mm solid boron cantilever rides the groove, while the aluminum and titanium base with hard resin cover disperses unwanted resonance. Handmade in Japan, the AT-ART1000 carries Audio-Technica's Excellence Product designation.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect Power System with dual moving coils positioned directly on the stylus tip\u003c\/li\u003e\n\u003cli\u003eHand-wound eight-turn coils of 20-micron PCOCC wire, non-magnetic core\u003c\/li\u003e\n\u003cli\u003eSpecial line contact stylus, nude rectangular shank (1.5 x 0.28 mil)\u003c\/li\u003e\n\u003cli\u003e0.26 mm solid boron cantilever\u003c\/li\u003e\n\u003cli\u003ePowerful neodymium magnet with 0.6 mm magnetic gap\u003c\/li\u003e\n\u003cli\u003eAluminum and titanium base construction to disperse resonance\u003c\/li\u003e\n\u003cli\u003eHandmade in Japan; Audio-Technica Excellence Product designation\u003c\/li\u003e\n\u003cli\u003eFee-based Moving Coil Exchange Program available for servicing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Direct Power dual moving coil (non-magnetic core)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus:\u003c\/strong\u003e Special line contact, nude rectangular shank, 1.5 x 0.28 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e 0.26 mm solid boron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Wire:\u003c\/strong\u003e 20 µm PCOCC (Pure Copper by Ohno Continuous Casting), air-core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet:\u003c\/strong\u003e Neodymium, with a 0.6 mm magnetic gap over a titanium magnetic-circuit base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e Aluminum and titanium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 0.2 mV (1 kHz, 5 cm\/sec)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 15 - 30,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 30 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Balance:\u003c\/strong\u003e 0.5 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e Specified individually for each cartridge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Load Impedance:\u003c\/strong\u003e 30 ohms minimum (with head amplifier)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Impedance:\u003c\/strong\u003e 3 ohms (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance:\u003c\/strong\u003e 3 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Inductance:\u003c\/strong\u003e 1 µH (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Compliance:\u003c\/strong\u003e 30 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Compliance:\u003c\/strong\u003e 12 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne (100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Tracking Angle:\u003c\/strong\u003e 21 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Half-inch standard mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42671699591374,"sku":"4961310136390","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-art1000_01.webp?v=1717528090"},{"product_id":"audio-technica-replacement-stylus-at-vmn95sh","title":"Audio-Technica - Replacement Stylus AT-VMN95SH","description":"\u003cp\u003e\u003cstrong\u003eGenuine Audio-Technica AT-VMN95SH replacement stylus — the 2.7 x 0.26 mil nude Shibata that tops the VM95 range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Shibata profile makes contact with the groove wall over a long, narrow footprint, reaching modulation a rounder tip rides straight over. Audio-Technica describes the result as a mid-to-high range with the Shibata signature and a strong midrange.\u003c\/p\u003e\n\u003cp\u003eThe nude diamond is mounted on a nude square shank with an aluminum cantilever. It fits every VM95 body, which makes it the single biggest upgrade available to anyone running a VM95C or VM95E. Rated at roughly 800 hours.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2.7 x 0.26 mil nude Shibata diamond on a nude square shank\u003c\/li\u003e\n\u003cli\u003eThe most advanced stylus profile in the VM95 line\u003c\/li\u003e\n\u003cli\u003eAluminum cantilever\u003c\/li\u003e\n\u003cli\u003eThe supplied stylus for the AT-VM95SH and AT-VM95SH\/H\u003c\/li\u003e\n\u003cli\u003eFits every VM95 body — the biggest single upgrade available to a VM95C or VM95E owner\u003c\/li\u003e\n\u003cli\u003eRoughly 800 hours of playing life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Shape:\u003c\/strong\u003e Shibata\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Construction:\u003c\/strong\u003e Nude square shank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Curvature Radius:\u003c\/strong\u003e 2.7 x 0.26 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied Stylus For:\u003c\/strong\u003e AT-VM95SH, AT-VM95SH\/H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso Fits:\u003c\/strong\u003e AT-VM95C, AT-VM95E, AT-VM95EN, AT-VM95ML, AT-VM95SP and the \/H headshell-mounted versions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Life:\u003c\/strong\u003e Approx. 800 hours\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42687816302798,"sku":"4961310146047","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-vmn95sh_01.webp?v=1718307317"},{"product_id":"audio-technica-vm740ml-dual-moving-magnet-cartridge-copy","title":"Audio-Technica - VM750SH Dual Moving Magnet Cartridge","description":"\u003cp\u003e\u003cstrong\u003eShibata refinement from Audio-Technica's original VM700 Series: extended highs, low groove stress and hour-after-hour listenability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe VM750SH is a premier model in Audio-Technica's VM line, a range that harks back to A-T's early days as a manufacturer primarily of high-end phono cartridges. Its dual moving magnet design positions two magnets to match the left and right channels of the stereo record groove, with paratoroidal coils that enhance generating efficiency and a center shield plate between channels to reduce crosstalk. This is the previous-generation VM700 Series model, since succeeded by the current AT-VM750xSH refresh.\u003c\/p\u003e\n\u003cp\u003eThe 2.7 x 0.26 mil Shibata stylus, in nude square-shank construction, makes greater groove contact than an elliptical tip, enabling pickup of ultra-high frequencies with less groove stress and distortion. It is mounted on an aluminum tapered pipe cantilever, and the die-cast aluminum alloy housing reduces vibration and provides shielding.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2.7 x 0.26 mil Shibata stylus with nude square shank construction\u003c\/li\u003e\n\u003cli\u003eAluminum tapered pipe cantilever\u003c\/li\u003e\n\u003cli\u003eDual magnets positioned to match the stereo channels in the record groove\u003c\/li\u003e\n\u003cli\u003eParatoroidal coils enhance generating efficiency\u003c\/li\u003e\n\u003cli\u003eCenter shield plate between channels reduces crosstalk\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminum alloy housing reduces vibration and provides shielding\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware, brush and lead wire set\u003c\/li\u003e\n\u003cli\u003eUser-replaceable stylus (VMN50SH)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e VM dual moving magnet stereo cartridge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus:\u003c\/strong\u003e 2.7 x 0.26 mil Shibata, nude square shank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Aluminum tapered pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Wire:\u003c\/strong\u003e 6N oxygen-free copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e Die-cast aluminum alloy housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 4.0 mV (1 kHz, 5 cm\/sec)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20-27,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Separation:\u003c\/strong\u003e 30 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Balance:\u003c\/strong\u003e 1.0 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Load:\u003c\/strong\u003e 47,000 ohms \/ 100-200 pF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Impedance:\u003c\/strong\u003e 2,700 ohms (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Inductance:\u003c\/strong\u003e 460 mH (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance:\u003c\/strong\u003e 800 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Compliance:\u003c\/strong\u003e 40 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Compliance:\u003c\/strong\u003e 10 x 10\u003csup\u003e-6\u003c\/sup\u003e cm\/dyne (100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Tracking Angle:\u003c\/strong\u003e 23 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Half-inch standard mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.0 g (0.3 oz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e VMN50SH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Replacement Stylus:\u003c\/strong\u003e Audio-Technica now lists the AT-VMN50xSH as fitting this body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Installation screws (5 mm x 2, 10 mm x 2), two washers, two hexagon nuts, non-magnetic screwdriver, brush and lead wire set\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42720047333582,"sku":"4961310137588","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/vm750sh_01.webp?v=1746736079"},{"product_id":"audio-technica-at-lp60xspbt-automatic-wireless-turntable-and-speaker-system-copy","title":"Audio-Technica - AT-LP60XBT Automatic Bluetooth Wireless Turntable","description":"\u003cp\u003e\u003cstrong\u003eAudio-Technica's best-selling automatic turntable, now with wireless freedom.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-LP60XBT pairs the redesigned AT-LP60X fully automatic belt-drive turntable with Bluetooth wireless technology, so you can spin your records through wireless speakers or headphones — or stick with a traditional wired connection using the included RCA cable. It supports the Qualcomm aptX codec for improved sound quality over standard SBC, and simple front-panel controls handle start, stop, and tonearm lift.\u003c\/p\u003e\n\u003cp\u003eLike the LP60X, it features a redesigned tonearm base and headshell for improved tracking and reduced resonance, an Integral Dual Moving Magnet phono cartridge with replaceable diamond stylus, and a built-in switchable phono\/line preamp for flexible wired connections. An external AC adapter keeps power conversion away from the chassis to minimize noise in the signal chain.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFully automatic belt drive with Bluetooth output\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.0 with Qualcomm aptX and SBC codecs\u003c\/li\u003e\n\u003cli\u003eAlso connects by cable through the switchable phono\/line preamp\u003c\/li\u003e\n\u003cli\u003eTwo speeds, 33-1\/3 and 45 RPM\u003c\/li\u003e\n\u003cli\u003eDC servo-controlled motor with an anti-resonance aluminum platter\u003c\/li\u003e\n\u003cli\u003eIntegral dual moving magnet cartridge; replacement stylus ATN3600LC, with the elliptical ATN3600LE available as an upgrade\u003c\/li\u003e\n\u003cli\u003eDust cover, felt mat, 45 RPM adapter and cables included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Belt drive, fully automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e DC servo-controlled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 33-1\/3 and 45 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatter:\u003c\/strong\u003e Anti-resonance die-cast aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge:\u003c\/strong\u003e Integral dual moving magnet (AT3600L family) — not removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e ATN3600LC; the elliptical ATN3600LE is a drop-in upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWow and Flutter:\u003c\/strong\u003e Less than 0.25% (WTD) at 3 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio:\u003c\/strong\u003e Greater than 50 dB (DIN-B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Level:\u003c\/strong\u003e Phono 2.5 mV \/ Line 150 mV nominal at 1 kHz, 5 cm\/sec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhono Preamp Gain:\u003c\/strong\u003e 36 dB nominal, RIAA equalized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e Version 5.0, A2DP profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Codecs:\u003c\/strong\u003e Qualcomm aptX and SBC. This model does not support aptX Adaptive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Range:\u003c\/strong\u003e Approx. 33′ (10 m) line of sight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e AC 100-240 V, 50\/60 Hz, 0.6 A max via the external adapter. US operation 120 V, 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 1.5 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 14.15″ (359.5 mm) W x 3.84″ (97.5 mm) H x 14.70″ (373.3 mm) D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.73 lbs (2.6 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Dust cover, felt mat, platter with drive belt, 45 RPM adapter, RCA audio cable (3.9′ \/ 1.2 m), AC adapter (4.9′ \/ 1.5 m)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42729592389838,"sku":"4961310147259","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-lp60xbt-bk_01.webp?v=1719966046"},{"product_id":"audio-technica-at-lp60x-fully-automatic-belt-drive-turntable-copy","title":"Audio-Technica - AT-LP70X Fully Automatic Belt-Drive Turntable","description":"\u003cp\u003e\u003cstrong\u003eThe perfect first step on your audiophile journey — warm analog sound with zero setup fuss.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-LP70X fully automatic belt-drive turntable blends warm analog sound with user-friendly automation, letting you enjoy your records without any tonearm balancing or cartridge installation. Just press start and the J-shaped tonearm — engineered to minimize tracking errors — does the rest, with a tonearm lock to protect the stylus when not in use.\u003c\/p\u003e\n\u003cp\u003eIt comes fitted with an AT-VM95C Integral Dual Moving Magnet phono cartridge that's compatible with the entire VM95 Series of replacement styli, so you can upgrade from the included conical stylus to elliptical, Micro-Linear, or Shibata as your ears (and collection) grow. A three-piece anti-resonance chassis and die-cast aluminum platter keep playback stable, the built-in switchable phono\/line preamp connects to virtually any system, and an external AC adapter keeps power-supply noise out of the signal chain.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFully automatic belt drive — select the speed, press start, and the arm does the rest\u003c\/li\u003e\n\u003cli\u003eJ-shaped tonearm, 8.7″ (220 mm) effective length with 18 mm overhang\u003c\/li\u003e\n\u003cli\u003eAT-VM95C dual moving magnet cartridge with a 0.6 mil conical stylus\u003c\/li\u003e\n\u003cli\u003eUpgradable with any VM95 series stylus — elliptical, MicroLinear or Shibata\u003c\/li\u003e\n\u003cli\u003eThree-piece anti-resonance chassis and die-cast aluminum platter\u003c\/li\u003e\n\u003cli\u003eBuilt-in switchable phono\/line preamp\u003c\/li\u003e\n\u003cli\u003eDust cover with hinges, felt mat, 45 RPM adapter and cables included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Belt drive, fully automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e DC motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 33-1\/3 and 45 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatter:\u003c\/strong\u003e Die-cast aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTonearm:\u003c\/strong\u003e J-shaped, 8.7″ (220 mm) effective length, 0.71″ (18 mm) overhang, tracking error less than 2.0 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge:\u003c\/strong\u003e AT-VM95C dual moving magnet, 0.6 mil bonded conical stylus — fixed body, not removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e AT-VMN95C; accepts any VM95 series stylus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWow and Flutter:\u003c\/strong\u003e Less than 0.25% (WTD)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio:\u003c\/strong\u003e Greater than 55 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Level:\u003c\/strong\u003e Phono 4.0 mV \/ Line 252 mV nominal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhono Preamp Gain:\u003c\/strong\u003e 36 dB nominal, RIAA equalized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e External AC adapter, AC 100-240 V, 50\/60 Hz input, 12 V DC 0.5 A output. US operation 120 V, 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 1.5 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 16″ (400 mm) W x 13″ (330 mm) D x 4.3″ (110 mm) H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.4 lbs (2.9 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Dust cover with hinges, felt mat, platter with drive belt, 45 RPM adapter, RCA audio cable (3.3′ \/ 1.0 m), AC adapter (4.9′ \/ 1.5 m)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Black\/Bronze","offer_id":42803124601038,"sku":"4961310162245","price":249.0,"currency_code":"USD","in_stock":false},{"title":"Black\/Grey","offer_id":42803124633806,"sku":"4961310162191","price":269.0,"currency_code":"USD","in_stock":true},{"title":"White\/Silver","offer_id":43173986304206,"sku":"AT-LP70X-WS","price":269.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-lp70x_bz_01_1_1.webp?v=1725911513"},{"product_id":"audio-technica-at-lp60xbt-automatic-bluetooth-wireless-turntable-copy","title":"Audio-Technica - AT-LP70XBT Automatic Bluetooth Wireless Turntable","description":"\u003cp\u003e\u003cstrong\u003eWarm analog sound meets modern wireless convenience — with aptX Adaptive Bluetooth on board.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-LP70XBT fully automatic belt-drive turntable combines warm, analog audio with the convenience of Bluetooth wireless technology. Stream your records to wireless speakers or headphones over Bluetooth 5.2 — with support for the high-quality aptX Adaptive codec — or go wired through the built-in switchable phono\/line preamp and included RCA cable.\u003c\/p\u003e\n\u003cp\u003eIt's fitted with an AT-VM95C Integral Dual Moving Magnet phono cartridge compatible with the entire VM95 Series of replacement styli, so you can step up from the included conical stylus whenever you're ready. A J-shaped tonearm engineered to minimize tracking errors, a three-piece anti-resonance chassis, and a die-cast aluminum platter keep playback stable, while an external AC adapter keeps power-supply noise out of the signal chain.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFully automatic belt drive with Bluetooth output\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.2 with Qualcomm aptX Adaptive, aptX and SBC codecs\u003c\/li\u003e\n\u003cli\u003eJ-shaped tonearm, 8.7″ (220 mm) effective length with 18 mm overhang\u003c\/li\u003e\n\u003cli\u003eAT-VM95C dual moving magnet cartridge with a 0.6 mil conical stylus\u003c\/li\u003e\n\u003cli\u003eUpgradable with any VM95 series stylus — elliptical, MicroLinear or Shibata\u003c\/li\u003e\n\u003cli\u003eThree-piece anti-resonance chassis and die-cast aluminum platter\u003c\/li\u003e\n\u003cli\u003eDust cover with hinges, felt mat, 45 RPM adapter and cables included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Belt drive, fully automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e DC motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 33-1\/3 and 45 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatter:\u003c\/strong\u003e Die-cast aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTonearm:\u003c\/strong\u003e J-shaped, 8.7″ (220 mm) effective length, 0.71″ (18 mm) overhang, tracking error less than 2.0 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge:\u003c\/strong\u003e AT-VM95C dual moving magnet, 0.6 mil bonded conical stylus — fixed body, not removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e AT-VMN95C; accepts any VM95 series stylus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWow and Flutter:\u003c\/strong\u003e Less than 0.25% (WTD)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio:\u003c\/strong\u003e Greater than 55 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Level:\u003c\/strong\u003e Phono 4.0 mV \/ Line 252 mV nominal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhono Preamp Gain:\u003c\/strong\u003e 36 dB nominal, RIAA equalized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e Version 5.2, A2DP profile, 2.402-2.480 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Codecs:\u003c\/strong\u003e Qualcomm aptX Adaptive, Qualcomm aptX and SBC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Range:\u003c\/strong\u003e Approx. 33′ (10 m) line of sight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e External AC adapter, AC 100-240 V, 50\/60 Hz input, 12 V DC 0.5 A output. US operation 120 V, 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 1.6 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 16″ (400 mm) W x 13″ (330 mm) D x 4.3″ (110 mm) H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approx. 6.4 lbs (2.9 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Dust cover with hinges, felt mat, platter with drive belt, 45 RPM adapter, RCA audio cable (3.3′ \/ 1.0 m), AC adapter (4.9′ \/ 1.5 m)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Bronze\/Black","offer_id":42803129024718,"sku":"4961310162368","price":319.0,"currency_code":"USD","in_stock":true},{"title":"Black\/Silver","offer_id":42817335394510,"sku":"4961310162306","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-lp70xbt_bz_01.webp?v=1725912824"},{"product_id":"audio-technica-powered-bookshelf-speakers-at-sp3x","title":"Audio-Technica - Powered Bookshelf Speakers - AT-SP3X","description":"\u003cp\u003e\u003cstrong\u003eA compact powered pair that needs no amplifier or receiver — just a turntable with its own phono stage, or anything with a line output.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-SP3X is a two-way design: each cabinet carries a 76 mm (3 inch) woofer and a 27 mm tweeter, and the left cabinet holds the amplification and drives the right through the supplied cable. Audio-Technica rates the system at 30 watts maximum output with a frequency response of 55 Hz to 20 kHz.\u003c\/p\u003e\n\u003cp\u003eConnection is either a stereo RCA line input or Bluetooth 5.3, and the Bluetooth implementation supports multipoint pairing so two devices can stay connected at once. Cabinets are 7.9 inches tall with a power LED and volume dial on the front.\u003c\/p\u003e\n\u003cp\u003eWorth being clear about the input: it is line level, not phono. A turntable needs a built-in preamp of its own, an external phono stage between the two, or a Bluetooth connection. Audio-Technica's own AT-LP60XBT, AT-LP70XBT and AT-LP120XBT-USB all pair over Bluetooth, and any deck with a switchable phono\/line output works over RCA.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePowered pair — no external amplifier or receiver needed\u003c\/li\u003e\n\u003cli\u003eTwo-way design with a 76 mm (3″) woofer and 27 mm tweeter per cabinet\u003c\/li\u003e\n\u003cli\u003e30 W maximum output; 55 Hz to 20 kHz frequency response\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.3 with multipoint pairing for two devices at once\u003c\/li\u003e\n\u003cli\u003eStereo RCA line input for turntables with a built-in preamp, CD players and DACs\u003c\/li\u003e\n\u003cli\u003eCompact cabinets with front power LED and volume dial\u003c\/li\u003e\n\u003cli\u003eUniversal AC adapter with four interchangeable plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Powered two-way bookshelf speakers, sold as a pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 76 mm (3.0″) diameter, one per cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 27 mm (1.1″) diameter, one per cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Output:\u003c\/strong\u003e 30 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 55 to 20,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e Stereo RCA line input; Bluetooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhono Input:\u003c\/strong\u003e None — line level only. A turntable requires its own phono preamp, an external phono stage, or a Bluetooth connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Version:\u003c\/strong\u003e 5.3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Profile:\u003c\/strong\u003e A2DP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Codec:\u003c\/strong\u003e SBC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Sample Rates:\u003c\/strong\u003e 44.1 kHz and 48 kHz at 16 and 24 bit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Range:\u003c\/strong\u003e Approx. 33′ (10 m) line of sight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Multipoint:\u003c\/strong\u003e Yes — two devices simultaneously\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e AC 100-240 V via the included adapter (18 V DC output). Compatible with US 120 V, 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7.9″ (200 mm) H x 4.9″ (125 mm) W x 5.4″ (136 mm) D per cabinet, excluding protrusions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Left 3.3 lbs (1.5 kg); right 3.5 lbs (1.6 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControls:\u003c\/strong\u003e Power button with LED indicator, volume dial\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e AC adapter, four interchangeable adapter plugs, speaker cable (6.6′ \/ 2.0 m), rubber feet x 8\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Black","offer_id":43060533231822,"sku":"4961310162184","price":269.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-sp3x_01.webp?v=1727817538"},{"product_id":"audio-technica-at-vmn95sp-replacement-stylus","title":"Audio-Technica - Replacement Stylus AT-VMN95SP","description":"\u003cp\u003e\u003cstrong\u003eGenuine Audio-Technica AT-VMN95SP replacement stylus — a 3.0 mil conical cut for the wide grooves of shellac 78s.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShellac 78s were cut with a far wider groove than microgroove LPs, and they need a correspondingly larger tip. This 3.0 mil bonded conical is sized for that job, and Audio-Technica lists it as suitable for 78 RPM records across a wide range of eras.\u003c\/p\u003e\n\u003cp\u003eIt fits any VM95 body, so a spare VM95 cartridge becomes a dedicated 78 player. Two things change when you fit it: tracking force goes up to 5.0 g, and because SP records carry monaural modulation, Audio-Technica recommends engaging your phono stage's mono setting.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e3.0 mil bonded conical diamond sized for shellac 78 RPM grooves\u003c\/li\u003e\n\u003cli\u003eBonded round shank with aluminum cantilever\u003c\/li\u003e\n\u003cli\u003eThe supplied stylus for the AT-VM95SP\u003c\/li\u003e\n\u003cli\u003eFits every VM95 body — turns a spare VM95 into a 78 RPM cartridge\u003c\/li\u003e\n\u003cli\u003eRequires 4.5-5.5 g tracking force (5.0 g standard), well above the 2.0 g stereo styli\u003c\/li\u003e\n\u003cli\u003eRoughly 500 hours of playing life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Shape:\u003c\/strong\u003e SP 3 mil conical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Construction:\u003c\/strong\u003e Bonded round shank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Curvature Radius:\u003c\/strong\u003e 3.0 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied Stylus For:\u003c\/strong\u003e AT-VM95SP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso Fits:\u003c\/strong\u003e AT-VM95C, AT-VM95E, AT-VM95EN, AT-VM95ML, AT-VM95SH and the \/H headshell-mounted versions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 4.5-5.5 g (5.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Life:\u003c\/strong\u003e Approx. 500 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant:\u003c\/strong\u003e For shellac 78s only. The 3.0 mil tip is far too large for microgroove LPs and 45s. Reset tracking force to 5.0 g when fitting, and back to 2.0 g when returning to a stereo stylus.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42893414432974,"sku":"4961310146092","price":62.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-vmn95sp_01.webp?v=1734134621"},{"product_id":"audio-technica-replacement-stylus-at-vmn95ml","title":"Audio-Technica - Replacement Stylus AT-VMN95ML","description":"\u003cp\u003e\u003cstrong\u003eGenuine Audio-Technica AT-VMN95ML replacement stylus — a 2.2 x 0.12 mil nude MicroLinear for the AT-VM95ML and the rest of the VM95 series.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MicroLinear profile closely mimics the cutting stylus used to master records, tracing high-frequency detail accurately while wearing more evenly than a conical or elliptical tip. The nude diamond sits on a nude square shank with an aluminum cantilever.\u003c\/p\u003e\n\u003cp\u003eIt carries the longest published life in the VM95 range at roughly 1,000 hours, and because every VM95 cartridge shares one body, it fits all of them as a direct upgrade.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2.2 x 0.12 mil nude MicroLinear diamond on a nude square shank\u003c\/li\u003e\n\u003cli\u003eAluminum cantilever\u003c\/li\u003e\n\u003cli\u003eTraces high-frequency detail with less wear and distortion than elliptical or conventional line-contact profiles\u003c\/li\u003e\n\u003cli\u003eThe supplied stylus for the AT-VM95ML and AT-VM95ML\/H\u003c\/li\u003e\n\u003cli\u003eInterchangeable across the VM95 family — every VM95 stylus fits every VM95 body\u003c\/li\u003e\n\u003cli\u003eRoughly 1,000 hours of playing life — the longest in the VM95 range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Shape:\u003c\/strong\u003e MicroLinear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Construction:\u003c\/strong\u003e Nude square shank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Curvature Radius:\u003c\/strong\u003e 2.2 x 0.12 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied Stylus For:\u003c\/strong\u003e AT-VM95ML, AT-VM95ML\/H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso Fits:\u003c\/strong\u003e AT-VM95C, AT-VM95E, AT-VM95EN, AT-VM95SH, AT-VM95SP and the \/H headshell-mounted versions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Life:\u003c\/strong\u003e Approx. 1,000 hours\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42893420036302,"sku":"4961310157340","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-vmn95ml_01.webp?v=1734135283"},{"product_id":"audio-technica-replacement-stylus-at-vmn95c","title":"Audio-Technica - Replacement Stylus AT-VMN95C","description":"\u003cp\u003e\u003cstrong\u003eGenuine Audio-Technica AT-VMN95C replacement stylus — a 0.6 mil bonded conical for the AT-VM95C and every other VM95 cartridge body.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe conical tip has a large enough curvature radius to sit correctly in the groove even when cartridge alignment is slightly off, which is what makes it the forgiving choice for a first turntable or a well-loved record collection. The bonded diamond is mounted on an aluminum cantilever.\u003c\/p\u003e\n\u003cp\u003eBecause all six VM95 cartridges share one body design, this stylus drops straight into any of them. Audio-Technica rates it at roughly 500 hours of playing life.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e0.6 mil bonded conical diamond on a bonded round shank\u003c\/li\u003e\n\u003cli\u003eAluminum cantilever\u003c\/li\u003e\n\u003cli\u003eThe supplied stylus for the AT-VM95C and AT-VM95C\/H\u003c\/li\u003e\n\u003cli\u003eForgiving of slight alignment error — a good match for entry-level setups\u003c\/li\u003e\n\u003cli\u003eInterchangeable across the VM95 family — every VM95 stylus fits every VM95 body\u003c\/li\u003e\n\u003cli\u003eRoughly 500 hours of playing life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Shape:\u003c\/strong\u003e Conical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Construction:\u003c\/strong\u003e Bonded round shank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Curvature Radius:\u003c\/strong\u003e 0.6 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied Stylus For:\u003c\/strong\u003e AT-VM95C, AT-VM95C\/H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso Fits:\u003c\/strong\u003e AT-VM95E, AT-VM95EN, AT-VM95ML, AT-VM95SH, AT-VM95SP and the \/H headshell-mounted versions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Life:\u003c\/strong\u003e Approx. 500 hours\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42893425770702,"sku":"4961310158095","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-vmn95c_01.webp?v=1734135684"},{"product_id":"audio-technica-atn3600lc-replacement-stylus","title":"Audio-Technica - ATN3600LC Replacement Stylus","description":"\u003cp\u003e\u003cstrong\u003eGenuine Audio-Technica ATN3600LC replacement stylus — the 0.6 mil conical fitted to current AT-LP60X series turntables and the Sound Burger.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the factory stylus for Audio-Technica's AT3600L integral cartridge, updated from the long-running ATN3600L with a modern housing while keeping the same easy fit and sound. The 0.6 mil conical tip keeps proper contact with the groove even when the cartridge is not sitting perfectly level, which is exactly what an entry-level automatic deck needs.\u003c\/p\u003e\n\u003cp\u003eIt snaps on and off by hand — no tools, no alignment, no tracking force to reset. Audio-Technica also lists it as backward compatible with the earlier AT-LP60 series.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e0.6 mil bonded conical diamond\u003c\/li\u003e\n\u003cli\u003eThe factory stylus on current AT-LP60X series turntables and Sound Burger models\u003c\/li\u003e\n\u003cli\u003eReplaces the stylus on the AT3600L integral cartridge\u003c\/li\u003e\n\u003cli\u003eSnap-on fit — no tools and no alignment required\u003c\/li\u003e\n\u003cli\u003eBackward compatible with legacy AT-LP60 series turntables\u003c\/li\u003e\n\u003cli\u003eRoughly 300 to 500 hours of playing life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Shape:\u003c\/strong\u003e Conical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Construction:\u003c\/strong\u003e Bonded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Curvature Radius:\u003c\/strong\u003e 0.6 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e AT3600L cartridge, as fitted to AT-LP60X series, AT-LP60 series, AT-LP2D series, AT-PL300 series, AT-SB727 and AT-SB2022 Sound Burger, AT-LPGO-BT, AT-PL50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 3.0-4.0 g (3.5 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Life:\u003c\/strong\u003e Approx. 300-500 hours\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42896578281678,"sku":"4961310162542","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/atn3600lc_resized_1.webp?v=1734484448"},{"product_id":"audio-technica-replacement-stylus-at-vmn95en","title":"Audio-Technica - Replacement Stylus AT-VMN95EN","description":"\u003cp\u003e\u003cstrong\u003eGenuine Audio-Technica AT-VMN95EN replacement stylus — the same 0.3 x 0.7 mil elliptical profile as the VMN95E, but nude rather than bonded.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA nude diamond is mounted directly rather than glued into a metal shank, so there is less mass at the tip for the cantilever to move. The tip traces the same elliptical path as the bonded VMN95E but with better transient response for it.\u003c\/p\u003e\n\u003cp\u003eAudio-Technica specifies a nude round shank on this one — only the ML and SH styli in the VM95 range use a square shank. The cantilever is aluminum, and the stylus fits every VM95 body. Rated at roughly 300 hours.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e0.3 x 0.7 mil nude elliptical diamond on a nude round shank\u003c\/li\u003e\n\u003cli\u003eLower tip mass than the bonded VMN95E for better transient response\u003c\/li\u003e\n\u003cli\u003eAluminum cantilever\u003c\/li\u003e\n\u003cli\u003eThe supplied stylus for the AT-VM95EN and AT-VM95EN\/H\u003c\/li\u003e\n\u003cli\u003eInterchangeable across the VM95 family — every VM95 stylus fits every VM95 body\u003c\/li\u003e\n\u003cli\u003eRoughly 300 hours of playing life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Shape:\u003c\/strong\u003e Elliptical nude\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Construction:\u003c\/strong\u003e Nude round shank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Curvature Radius:\u003c\/strong\u003e 0.3 x 0.7 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied Stylus For:\u003c\/strong\u003e AT-VM95EN, AT-VM95EN\/H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso Fits:\u003c\/strong\u003e AT-VM95C, AT-VM95E, AT-VM95ML, AT-VM95SH, AT-VM95SP and the \/H headshell-mounted versions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Life:\u003c\/strong\u003e Approx. 300 hours\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42896579330254,"sku":"4961310146061","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-vmn95en_01.webp?v=1734484738"},{"product_id":"audio-technica-atn3600le-replacement-stylus","title":"Audio-Technica - ATN3600LE Replacement Stylus","description":"\u003cp\u003e\u003cstrong\u003eGenuine Audio-Technica ATN3600LE replacement stylus — a 0.3 x 0.7 mil elliptical upgrade for any turntable running the conical ATN3600L or ATN3600LC.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the easiest meaningful upgrade available to an AT-LP60X or Sound Burger owner. The elliptical tip is narrower than the conical it replaces, so it sits lower in the groove and reads information a conical simply cannot reach, with better high-frequency response and less sensitivity to surface scratches.\u003c\/p\u003e\n\u003cp\u003eTracking force is unchanged at 3.5 g, so there is nothing to rebalance — the old stylus pulls off, the new one snaps on, and that is the whole job.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e0.3 x 0.7 mil bonded elliptical diamond\u003c\/li\u003e\n\u003cli\u003eA drop-in upgrade from the conical ATN3600L or ATN3600LC\u003c\/li\u003e\n\u003cli\u003eSits lower in the groove and reads detail a conical tip cannot reach\u003c\/li\u003e\n\u003cli\u003eBetter high-frequency response and less sensitivity to surface scratches\u003c\/li\u003e\n\u003cli\u003eSame 3.5 g tracking force as the conical — no tonearm adjustment needed\u003c\/li\u003e\n\u003cli\u003eRoughly 300 hours of playing life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Shape:\u003c\/strong\u003e Elliptical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Construction:\u003c\/strong\u003e Bonded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Curvature Radius:\u003c\/strong\u003e 0.3 x 0.7 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e AT3600L and AT3600LC cartridges, as fitted to AT-LP60X series, AT-LP60 series, AT-LP2D series, AT-PL300 series, AT-SB727 and AT-SB2022 Sound Burger, AT-LPGO-BT, AT-PL50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 3.0-4.0 g (3.5 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Life:\u003c\/strong\u003e Approx. 300 hours\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42933602123982,"sku":"4961310162566","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/atn3600le_01a_1.png?v=1738003341"},{"product_id":"audio-technica-at-lp8x-semi-automatic-direct-drive-turntable","title":"Audio-Technica - AT-LP8X Semi-Automatic Direct-Drive Turntable","description":"\u003cp\u003e\u003cstrong\u003eA rare treat among direct-drive decks: audiophile build quality with a semi-automatic tonearm lift that ends every side gracefully.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AT-LP8X expands Audio-Technica's direct-drive lineup with a newly designed low-torque, direct-drive DC servo motor that improves wow and flutter performance, paired with a speed-sensor system for accurate rotation and an electronic brake. It plays 33-1\/3, 45 and 78 RPM records on a 25 mm rubber-damped, anti-resonance die-cast aluminum platter, seated in an MDF cabinet with height-adjustable feet. Its defining feature is a newly designed tonearm lift that automatically raises the tonearm at the end of a record side and stops the motor, so you can relax into a side without hovering near the deck.\u003c\/p\u003e\n\u003cp\u003eThe J-shaped tonearm with adjustable VTA (vertical tracking angle) is inspired by classic Audio-Technica models of the 1960s and '70s, and carries the lightweight AT-LT10 headshell fitted with an AT-VM95E cartridge featuring a 0.3 x 0.7 mil elliptical stylus for excellent channel separation and low distortion. The AT-LP8X provides pure phono-level output via a detachable RCA cable with ground, feeding your choice of phono preamp for maximum flexibility. A subcounterweight is included to accommodate heavier cartridges.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect drive with a DC servo motor and speed-sensor system\u003c\/li\u003e\n\u003cli\u003eSemi-automatic: the arm lifts and the platter stops at the end of a side\u003c\/li\u003e\n\u003cli\u003eThree speeds, 33-1\/3, 45 and 78 RPM\u003c\/li\u003e\n\u003cli\u003e25 mm die-cast aluminum platter with rubber damper and a 2.5 mm rubber mat\u003c\/li\u003e\n\u003cli\u003eStatic balanced J-shaped aluminum tonearm with VTA adjustment, 247 mm effective length\u003c\/li\u003e\n\u003cli\u003eRemovable AT-LT10 headshell with an AT-VM95E BK dual magnet cartridge\u003c\/li\u003e\n\u003cli\u003eCounterweight and subcounterweight supplied for a wide range of cartridge weights\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Method:\u003c\/strong\u003e Direct drive, semi-automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e DC servo motor with speed-sensor system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 33-1\/3, 45 and 78 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting Torque:\u003c\/strong\u003e 1.0 kgf·cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatter:\u003c\/strong\u003e Die-cast aluminum with rubber damper, 25 mm (1″) thick, with 2.5 mm rubber mat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTonearm:\u003c\/strong\u003e Static balanced J-shaped aluminum with VTA adjustment, 247 mm (9.7″) effective length, 15 mm (0.59″) overhang, tracking error less than 2.0 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadshell:\u003c\/strong\u003e AT-LT10 removable headshell, 10.7 g (0.38 oz) including lead wires\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge:\u003c\/strong\u003e AT-VM95E BK dual magnet, 0.3 x 0.7 mil bonded elliptical stylus, removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Stylus:\u003c\/strong\u003e AT-VMN95E BK; accepts any VM95 series stylus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Pressure Range:\u003c\/strong\u003e 0.0-4.0 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWow and Flutter:\u003c\/strong\u003e Less than 0.1% (WTD) at 3 kHz (JIS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio:\u003c\/strong\u003e Greater than 60 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Level:\u003c\/strong\u003e Phono 4.0 mV at 1 kHz, 5 cm\/sec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e AC 100-240 V, 50\/60 Hz, internal switching supply with detachable power cable. US operation 120 V, 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 8 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 17.72″ (450 mm) W x 13.86″ (352 mm) D x 6.34″ (161 mm) H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approx. 23 lbs (10.4 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Dust cover with removable hinges, rubber mat, platter, counterweight, subcounterweight, AT-LT10 headshell with AT-VM95E BK cartridge, 45 RPM adapter, RCA audio cable (3.3′ \/ 1.0 m), power cable (5.9′ \/ 1.8 m)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":42939450753230,"sku":"4961310162009","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-lp8x_01.png?v=1738633137"},{"product_id":"audio-technica-at-lh11h-universal-headshell","title":"Audio-Technica - AT-LH11H Universal Headshell","description":"\u003cp\u003e\u003cstrong\u003eThe lightest of Audio-Technica's LH series at a nominal 11 grams, with an adjustable cylinder for setting azimuth and overhang.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHeadshell mass is part of tonearm tuning, not an afterthought. The LH series exists in four weights — 11, 13, 15 and 18 grams — so you can match effective mass to your cartridge's compliance rather than accept whatever the arm came with. The AT-LH11H is the lightest, which suits higher-compliance cartridges.\u003c\/p\u003e\n\u003cp\u003eThe body and connector are hard-anodized aluminum, a finish Audio-Technica specifies for damping unwanted vibration. What sets the LH series apart is the adjustable cylinder: loosen it with the supplied hex wrench and you can set azimuth and overhang precisely, then lock it down. Lead wires are OFC with PCOCC terminal pins.\u003c\/p\u003e\n\u003cp\u003eNote that the mounting holes are non-threaded and no nuts are supplied, so this headshell is built around cartridges with threaded bodies — the AT-OC9X series, AT-ART9X and VM95 series among them.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLightest of the LH series at a nominal 11 g\u003c\/li\u003e\n\u003cli\u003eHard-anodized aluminum body and connector to damp vibration\u003c\/li\u003e\n\u003cli\u003eAdjustable cylinder sets azimuth and overhang precisely\u003c\/li\u003e\n\u003cli\u003eOFC lead wires with PCOCC terminal pins\u003c\/li\u003e\n\u003cli\u003eSuits threaded-body cartridges such as AT-OC9X, AT-ART9X and VM95\u003c\/li\u003e\n\u003cli\u003eHex wrench, M2.6 screws and washers supplied\u003c\/li\u003e\n\u003cli\u003ePart of a four-weight family (11, 13, 15 and 18 g) for matching arm effective mass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Universal half-inch, H-4 bayonet connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Nominal 11 g. Audio-Technica Japan publishes approx. 11.5 g including lead wires and approx. 10.7 g excluding them, in both cases excluding mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 18.5 mm H x 17 mm W x 41.7 mm D, excluding connector and protrusions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Hard-anodized aluminum; aluminum connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Wires:\u003c\/strong\u003e OFC, with PCOCC terminal pins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Rotating and sliding cylinder for azimuth and overhang, locked with the supplied hex wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge Mounting:\u003c\/strong\u003e Non-threaded through-holes — intended for threaded-body cartridges; no nuts supplied\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Hex wrench x 1, M2.6 screws 8.0 mm x 2 and 10.0 mm x 2, plastic washers x 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e AT-LH11H (11 g), AT-LH13H (13 g), AT-LH15H (15 g), AT-LH18H (18 g)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":43059577716942,"sku":"4961310154493","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-lh11h_01.webp?v=1749070474"},{"product_id":"audio-technica-at-vmn40xml-replacement-stylus","title":"Audio-Technica - Replacement Stylus AT-VMN40xML","description":"\u003cp\u003e\u003cstrong\u003eGenuine Audio-Technica AT-VMN40xML replacement stylus — a 2.2 x 0.12 mil nude MicroLinear on a tapered aluminum cantilever.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MicroLinear profile follows the shape of the cutting stylus that mastered the record, reaching into groove modulation that rounder tips ride over and wearing evenly as it does so. The diamond is nude and grain-oriented for extended life.\u003c\/p\u003e\n\u003cp\u003eAudio-Technica lists it for the AT-VM740xML and for the legacy VM540ML and VM740ML bodies, which makes it a straight drop-in upgrade for owners of those older cartridges. Made in Japan, rated at roughly 1,000 hours.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2.2 x 0.12 mil nude MicroLinear diamond, grain-oriented for extended wear life\u003c\/li\u003e\n\u003cli\u003eTapered aluminum cantilever\u003c\/li\u003e\n\u003cli\u003eThe supplied stylus for the AT-VM740xML\u003c\/li\u003e\n\u003cli\u003eAlso fits the legacy VM540ML and VM740ML bodies\u003c\/li\u003e\n\u003cli\u003eThe aluminum-cantilever alternative to the boron-cantilever AT-VMN45xML\u003c\/li\u003e\n\u003cli\u003eMade in Japan; roughly 1,000 hours of playing life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Shape:\u003c\/strong\u003e MicroLinear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Construction:\u003c\/strong\u003e Nude square shank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Curvature Radius:\u003c\/strong\u003e 2.2 x 0.12 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCantilever:\u003c\/strong\u003e Tapered aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e AT-VM740xML, VM540ML, VM740ML\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Force:\u003c\/strong\u003e 1.8-2.2 g (2.0 g standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylus Life:\u003c\/strong\u003e Approx. 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audio Technica","offers":[{"title":"Default Title","offer_id":43173990891726,"sku":"4961310163365","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/at-vmn40xml_01.png?v=1758922979"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/collections\/audio-technica-logo-png-transparent.png?v=1714151533","url":"https:\/\/www.theingroove.com\/collections\/audio-technica.oembed?page=4","provider":"The 'In' Groove","version":"1.0","type":"link"}