{"product_id":"pro-ject-power-supply-for-non-dc-turntables-15v-ac","title":"Pro-Ject - Power Supply for Non-DC Turntables 15V AC (ET-0184, 6418 412 002)","description":"\u003cp\u003e\u003cstrong\u003eThe replacement AC adapter for older Pro-Ject turntables built around a synchronous AC motor — part 6418 412 002, superseded by ET-0184. Read the compatibility note before you order: this is the part people most often buy by mistake.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePro-Ject has used three different 15V power supplies across its history, and they are not interchangeable. Buying the wrong one is the single most common ordering error in the Pro-Ject accessory catalogue, so here is the whole picture in one place.\u003c\/p\u003e\n\u003cp\u003eThis part is the AC supply for turntables with a synchronous AC motor — the older, non-DC decks. Pro-Ject’s compatibility list covers the original Debut, Debut II and III, Debut Carbon (the non-DC version) and Debut Carbon USB, Essential and Essential II, Xpression Carbon, 1.2 and 1.2E, 1 Xpression and 1 Xpression II, 2.9 Classic, 2.9 Wood and 6.9, Perspective and Perspective II, and the RPM 4, 5, 6, 6SB, 9, 9X, 9XP and 10. It carries part number 6418 412 002, superseded by ET-0184.\u003c\/p\u003e\n\u003cp\u003eIt is not the supply for a DC-motor Pro-Ject turntable. Those decks — the Debut Carbon DC, the Debut EVO family, the E1, the X-series, the A1 and so on — take a 15V DC supply, which Pro-Ject currently publishes at 800mA. AC into a DC deck, or DC into an AC deck, will not work and may do damage. Check the label on your existing supply: if it says AC, this is your part; if it says DC, it is not.\u003c\/p\u003e\n\u003cp\u003eIt is also not the supply for a Phono Box or Tube Box. Every phono stage in that range runs on 18V DC, with the Phono Box RS2 on 20V DC. Nothing in the Phono Box or Tube Box line takes 15V of any kind.\u003c\/p\u003e\n\u003cp\u003eOne honest note on the current rating. Pro-Ject’s own retail channel is inconsistent about it: the part is sold as 15V AC 1A under the ET-0184 number and as 15V AC 550mA under the older 6418 412 002 number, and both descriptions are in circulation for what is presented as the same lineage of part. We could not find a single authoritative Pro-Ject figure that settles it. Either rating will run any of the AC turntables listed above — a synchronous motor of that size draws well under 550mA — but if the exact number matters to you, tell us and we will read the label on the unit in stock before it ships.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAC output, 15V — for Pro-Ject turntables with a synchronous AC motor\u003c\/li\u003e\n\u003cli\u003ePro-Ject part 6418 412 002, superseded by ET-0184\u003c\/li\u003e\n\u003cli\u003eDirect replacement for a lost, damaged or wrong-voltage original\u003c\/li\u003e\n\u003cli\u003eFits the Debut, Debut II\/III, Debut Carbon (non-DC), Essential, Xpression, Perspective, RPM and 2.9\/6.9 families\u003c\/li\u003e\n\u003cli\u003eNOT for DC-motor turntables, which take 15V DC\u003c\/li\u003e\n\u003cli\u003eNOT for any Phono Box or Tube Box, which take 18V DC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e AC output wall power supply for Pro-Ject turntables with a synchronous AC motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage:\u003c\/strong\u003e 15V AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current rating:\u003c\/strong\u003e Pro-Ject’s retail channel carries this part at both 1A (under part number ET-0184) and 550mA (under the older part number 6418 412 002), for what is presented as the same lineage of part. We could not find an authoritative manufacturer figure resolving the two. Ask us and we will read the label on the unit in stock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart numbers:\u003c\/strong\u003e 6418 412 002, superseded by ET-0184\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible turntables:\u003c\/strong\u003e Debut, Debut II, Debut III, Debut Carbon (non-DC), Debut Carbon USB, Essential, Essential II, Xpression Carbon, 1.2, 1.2E, 1 Xpression, 1 Xpression II, 2.9 Classic, 2.9 Wood, 6.9, Perspective, Perspective II, RPM 4, RPM 5, RPM 6, RPM 6SB, RPM 9, RPM 9X, RPM 9XP, RPM 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNOT compatible with:\u003c\/strong\u003e Pro-Ject DC-motor turntables, which require a 15V DC supply — Pro-Ject currently publishes that part at 15V DC \/ 800mA. Also not compatible with any Phono Box or Tube Box: those run on 18V DC, and the Phono Box RS2 on 20V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow to tell which you need:\u003c\/strong\u003e Read the printed label on your existing supply. If it says AC, this is the correct part. If it says DC, it is not\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of manufacture:\u003c\/strong\u003e Not published for this product\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two years from date of purchase, extendable to three years by registering the product with Pro-Ject and subscribing to their newsletter. Pro-Ject states that warranty is administered by the local distributor and that terms can vary by region; no separate United States term is published. Coverage requires purchase from an authorised dealer — The ’In Groove is one.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sumiko","offers":[{"title":"Default Title","offer_id":42890753704142,"sku":"2271279","price":64.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/Screenshot2024-12-10114323.jpg?v=1734945264","url":"https:\/\/www.theingroove.com\/de\/products\/pro-ject-power-supply-for-non-dc-turntables-15v-ac","provider":"The 'In' Groove","version":"1.0","type":"link"}