Yamaha - R-N2000A Network Receiver

The R-N1000A’s feature set rebuilt on flagship hardware: a toroidal transformer, floating and balanced power amplifier topology, the higher-tier ESS Sabre ES9026PRO DAC, illuminated level meters, and 48.7 lb of chassis against the R-N1000A’s 27.1.

Everything the R-N1000A does, this does too — streaming over Wi-Fi and Ethernet, AirPlay 2, Bluetooth, MusicCast, Roon Tested operation, YPAO room correction with the microphone in the box, an FM tuner, a moving-magnet phono input, an HDMI ARC input and a USB DAC. The difference is what it is built on. Yamaha uses its Floating and Balanced Power Amplifier topology here, with the power supply electrically isolated from ground and a symmetrical folding-book internal layout, fed by a toroidal transformer that Yamaha’s own copy calls a high-end design typically reserved for flagship models. The mechanical ground concept welds mounting bolts directly to the main chassis. None of that language appears on the R-N1000A’s pages, and the near-doubling of weight bears it out.

The DAC steps up too, from the R-N1000A’s ES9080Q to an ESS Sabre ES9026PRO, with the same DSD 11.2 MHz and PCM 384 kHz handling and internal precision EQ processing at 192 kHz / 64-bit. And the front panel carries the softly illuminated level meters that are the model’s signature — Yamaha’s own copy avoids calling them VU meters, though a third-party review describes them as high-resolution VU meters with adjustable brightness.

Two specification traps to know about. First, Yamaha’s own specification page for this model omits HDMI entirely — the word does not appear on it. The product page and the owner’s manual both confirm one HDMI ARC input, identical to the R-N1000A’s, with eARC explicitly unsupported. The specification table is simply incomplete. Second, that same page lists three different power figures: 90 watts into 8 ohms at 0.07% distortion across the full band, 120 watts at 10% distortion at 1 kHz, and 190 watts into 4 ohms at 0.7% for Europe. Only the first is a hi-fi-grade rating; the other two are measured at distortion levels an order of magnitude looser and should never be quoted bare.

As on the R-N1000A the phono input is moving-magnet only, the USB port is Type-B for a computer with no front flash-drive socket, and no balanced XLR outputs are documented despite the internally balanced topology.

Features

• Floating and Balanced Power Amplifier topology with the power supply isolated from ground
• Toroidal power transformer — described by Yamaha as a design usually reserved for flagship models
• ESS Sabre ES9026PRO Ultra DAC, a higher-tier part than the R-N1000A’s ES9080Q
• Illuminated level meters
• 90 W + 90 W into 8 ohms and 145 W + 145 W into 4 ohms, 20 Hz – 20 kHz at 0.07% THD
• YPAO with R.S.C. and precision EQ — measurement microphone included
• Wi-Fi and Ethernet streaming, AirPlay 2, Bluetooth, MusicCast, Roon Tested
• One HDMI ARC input for a television (ARC only; eARC is not supported)
• Moving-magnet phono input and an FM tuner
• Mechanical ground concept with mounting bolts welded directly to the chassis
• Five-year US parts and labour warranty

Specifications

• Type: Network stereo receiver with built-in DAC, tuner and phono stage
• Rated output power: 90 W + 90 W into 8 ohms and 145 W + 145 W into 4 ohms, both 20 Hz – 20 kHz at 0.07% THD
• Other published power figures: 120 W + 120 W into 8 ohms at 1 kHz and 10% THD, and 190 W + 190 W into 4 ohms at 1 kHz and 0.7% THD (a European figure). Both are measured at far looser distortion than the rated figure above and should not be quoted without their conditions
• High dynamic power: 100 W into 8 ohms, 130 W into 6 ohms, 185 W into 4 ohms, 215 W into 2 ohms. No THD or bandwidth condition is published
• Frequency response: 5 Hz – 100 kHz, +0 / −3 dB; 20 Hz – 20 kHz, +0 / −0.3 dB (Pure Direct on)
• Signal-to-noise ratio: 110 dB (Pure Direct on, CD)
• DAC: ESS Sabre ES9026PRO Ultra DAC
• USB: Type B only, for a computer. PCM to 384 kHz, DSD 11.2 MHz native. No front USB-A port for flash-drive playback
• Internal processing: Precision EQ processing at 192 kHz / 64-bit
• HDMI: One HDMI terminal, input only, ARC only. It connects to a television’s HDMI (ARC) output and carries two-channel PCM from the TV; it cannot accept a disc player or other source device. Yamaha’s owner’s manual states verbatim that “this product does not support eARC.” Note that Yamaha’s own specification page for this model omits HDMI altogether; the product page and manual both confirm it is fitted.
• Room correction: YPAO with R.S.C. and precision EQ. Measurement microphone included. Yamaha’s manual documents a single listening-position measurement
• Streaming: Ethernet and Wi-Fi, Bluetooth (SBC and AAC; no aptX), AirPlay 2, MusicCast, Roon Tested. Yamaha names Spotify and Amazon Music HD in its copy; TIDAL, Deezer, Qobuz, Napster and Pandora appear in the product page’s imagery and are confirmed by a third-party review, as are DLNA and internet radio. Wi-Fi band is not published
• Tuner: FM confirmed (50 dB quieting sensitivity 3 µV / 20.8 dBf; signal-to-noise 69 dB mono, 67 dB stereo). AM band presence for the US unit is not explicitly confirmed in the accessible manual text for this model, though the R-N1000A’s manual confirms FM/AM for US units
• Phono stage: Moving magnet only. Yamaha’s manual is explicit: “The PHONO jacks of this product are compatible with MM cartridges. Use a step-up transformer or the like when connecting a turntable… equipped with an MC (low-output) cartridge.”
• Analogue inputs: Phono, CD, Line 1, Line 2
• Digital inputs: Optical ×2, coaxial ×1, HDMI (ARC) ×1, USB Type-B, Ethernet
• Outputs: Headphones, subwoofer out, trigger out. Yamaha’s specification page does not break out a preamp-out row for this model as it does for the R-N1000A. No balanced XLR outputs are documented despite the internally balanced topology
• Headphone output: Fitted. No power or impedance rating is published
• Level meters: Yes. Yamaha describes softly illuminated level meters; a third-party review reports adjustable brightness. Yamaha’s own copy does not use the term VU meter
• Pure Direct: Yes
• Chassis: Floating and Balanced Power Amplifier topology, symmetrical folding-book internal layout with the power supply centred, mechanical ground concept with bolts welded directly to the main chassis, toroidal transformer
• Dimensions (W×H×D): 17-1/8″ × 6-1/8″ × 18-5/8″; 9-1/8″ high with the antenna raised
• Weight: 48.7 lb
• Power consumption: Not published in operation. Standby 0.1 W, or 1.8 W with the Wi-Fi connection maintained
• Finishes: Black with piano black side panels, or silver with piano black side panels
• Country of manufacture: Not published. Yamaha prints no country-of-manufacture statement on this model’s US product pages, specification tables or owner’s manual. The only geographic reference in Yamaha’s own documentation is the corporate head-office address in Hamamatsu, Japan, which is a company address and not a manufacturing statement. Third-party retailers and reviewers often assert “made in Japan” for this model — Yamaha does not.
• Warranty: Five years, parts and labour. This model is named individually in Yamaha’s Limited Warranty on Premium Hi-Fi Products, which supersedes the general two-year A/V Products term that covers the rest of the range. Registration is not mentioned in the document and coverage is not conditioned on it. Cover is limited to the original owner and is not transferable.