{"product_id":"pro-ject-debut-carbon-evo-turntable","title":"Pro-Ject - Debut Carbon EVO Turntable","description":"\u003cp\u003e\u003cstrong\u003eThe Debut that made the carbon tonearm ordinary — a one-piece carbon arm tube, a 1.7kg steel platter and eight coats of hand-applied paint, at a price that made the rest of the entry-level market rethink itself.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePro-Ject built the original Debut in 1999 around a simple argument: that a rigid MDF plinth, a decent bearing and a belt-driven AC motor could be made in Europe for the money everyone else was spending on plastic. The Debut Carbon Evolution — Debut Carbon EVO on Pro-Ject’s own paperwork — is the generation where that argument matured. The tonearm is a single piece of carbon fibre rather than an aluminium tube with a carbon wrap, the platter is 1.7kg of steel with TPE damping bonded to its underside, and the feet are height-adjustable damped aluminium rather than the moulded rubber the range started with.\u003c\/p\u003e\n\u003cp\u003eSpeed change is electronic. There is a rocker on the underside of the plinth that moves the deck between 33 and 45rpm without lifting the platter, which is the single biggest quality-of-life improvement over the older Debuts. A separate round belt is supplied for 78rpm and that one does have to be fitted by hand.\u003c\/p\u003e\n\u003cp\u003eA word about the cartridge, because it matters. Pro-Ject’s European specification for this deck is an Ortofon 2M Red, factory-fitted and pre-aligned. Pro-Ject’s own product page carries a note that the US version ships with a Sumiko Rainier instead. We have seen both fitments reach this market. Call or email before you order if the cartridge choice is what decides it for you, and we will tell you exactly what is on the deck in the box.\u003c\/p\u003e\n\u003cp\u003eThe tonearm has an effective mass of 6g, which is genuinely light. That suits high-compliance moving-magnet cartridges — the 2M range, Sumiko’s Oyster series, Audio-Technica’s VM line — and it is worth knowing before you go shopping for a low-compliance moving coil, which would be a poor match here.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOne-piece carbon fibre tonearm tube, 8.6 inches, with an effective mass of 6g\u003c\/li\u003e\n\u003cli\u003e1.7kg steel platter with TPE damping and a felt mat\u003c\/li\u003e\n\u003cli\u003eElectronic 33\/45rpm speed change; 78rpm available using the supplied round belt\u003c\/li\u003e\n\u003cli\u003eEight-layer hand-painted MDF plinth, or real walnut veneer\u003c\/li\u003e\n\u003cli\u003eThree height-adjustable, damped aluminium feet\u003c\/li\u003e\n\u003cli\u003eBelt-driven AC motor, isolated from the plinth\u003c\/li\u003e\n\u003cli\u003eGold-plated RCA outputs with a Connect it E semi-symmetrical phono cable supplied\u003c\/li\u003e\n\u003cli\u003eAcrylic dust cover included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Belt-driven manual turntable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge:\u003c\/strong\u003e Ortofon 2M Red moving-magnet, factory-fitted and pre-adjusted, per Pro-Ject’s global specification. Pro-Ject’s product page states that the US version ships with a Sumiko Rainier in its place — ask us which is fitted to the deck in stock before ordering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTonearm:\u003c\/strong\u003e 8.6″ one-piece carbon fibre\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective tonearm length:\u003c\/strong\u003e 218.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective tonearm mass:\u003c\/strong\u003e 6.0g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverhang:\u003c\/strong\u003e 18.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffset angle and mounting distance:\u003c\/strong\u003e Not published\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVTA adjustment:\u003c\/strong\u003e Not published\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-skate:\u003c\/strong\u003e Pro-Ject does not publish the anti-skate mechanism type for this deck. We checked the product page and the downloadable manual and neither describes it as magnetic or as a thread-and-weight assembly, so we are not going to guess.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatter:\u003c\/strong\u003e 300mm steel, 1.7kg, TPE-damped, supplied with a felt mat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 33 and 45rpm, changed electronically. 78rpm is possible using the separate round belt supplied in the box, fitted by hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWow and flutter:\u003c\/strong\u003e ±0.17% at 33rpm; ±0.15% at 45rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed deviation:\u003c\/strong\u003e ±0.5% at 33rpm; ±0.6% at 45rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 68dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRumble:\u003c\/strong\u003e Not published\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinth:\u003c\/strong\u003e MDF, eight coats of hand-applied paint, or real walnut veneer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishes:\u003c\/strong\u003e High gloss black, white or red; satin black, white, fir green, golden yellow or steel blue; real walnut veneer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeet:\u003c\/strong\u003e Three height-adjustable damped aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e Gold-plated RCA, supplied with a Connect it E semi-symmetrical phono cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e External 15V DC \/ 0.8A universal supply\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 415 x 113 x 320 mm (W x H x D). Pro-Ject does not state whether this is measured with the dust cover fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6kg net\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied accessories:\u003c\/strong\u003e Acrylic dust cover, felt mat, 78rpm round belt, Connect it E phono cable, power supply\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of manufacture:\u003c\/strong\u003e Handmade in Europe. Pro-Ject does not narrow this to a specific country for this model\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two years from date of purchase, extendable to three years by registering the product with Pro-Ject and subscribing to their newsletter. Cartridges, styli and drive belts are wear items and are excluded. Pro-Ject states that warranty is administered by the local distributor and that terms can vary by region; no separate United States term is published. Coverage requires purchase from an authorised dealer — The ’In Groove is one.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sumiko","offers":[{"title":"Gloss Black","offer_id":39373545898190,"sku":"9120097825742","price":599.0,"currency_code":"USD","in_stock":false},{"title":"Gloss Red","offer_id":39373545930958,"sku":"844682010151","price":599.0,"currency_code":"USD","in_stock":false},{"title":"Gloss White","offer_id":39373545963726,"sku":"844682010168","price":599.0,"currency_code":"USD","in_stock":false},{"title":"Satin Walnut","offer_id":39373545996494,"sku":"9120097826138","price":599.0,"currency_code":"USD","in_stock":false},{"title":"Satin Black","offer_id":39373546029262,"sku":"9120097826084","price":599.0,"currency_code":"USD","in_stock":false},{"title":"Satin Blue","offer_id":39373546062030,"sku":"9120097826091","price":599.0,"currency_code":"USD","in_stock":false},{"title":"Satin Green","offer_id":41274750173390,"sku":"9120097826107","price":599.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_70f4f6e1-0ccc-46de-8de9-86aab3a6e837.jpg?v=1617416851","url":"https:\/\/www.theingroove.com\/products\/pro-ject-debut-carbon-evo-turntable","provider":"The 'In' Groove","version":"1.0","type":"link"}