{"product_id":"rega-2mm-3-point-spacer","title":"Rega - 2MM 3-Point Spacer","description":"\u003cp\u003e\u003cstrong\u003eA 2mm arm height spacer that fits under the tonearm base — not, despite common belief, a shim that goes between cartridge and headshell.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis part is widely misunderstood, so let us be precise about what it is. It is a 2mm spacer that fits under the tonearm base, between the three-point tonearm mounting and the plinth or armboard, raising the whole arm by 2mm. It does not fit between the cartridge and the headshell. Cartridge-to-headshell shims are a different product entirely, and buying the wrong one is a wasted trip.\u003c\/p\u003e\n\u003cp\u003eWhat it is for, in Rega’s own words: some other manufacturers’ cartridges have a deeper body than Rega’s, and these will sometimes require the spacer to give clearance between the rear of the cartridge and the record. The second use case is fitting a Rega arm to a non-Rega turntable, where spacers may be needed to get the arm height right.\u003c\/p\u003e\n\u003cp\u003eRega is clear that on a Rega turntable you should not need one unless you are using an exceptionally deep-bodied cartridge from another maker, and that adjustment is only called for if the rear of the cartridge is actually hitting the record while playing. This is a fix for a specific problem, not a routine upgrade.\u003c\/p\u003e\n\u003cp\u003eIt fits all Rega three-point tonearms, including the current Planar range. Note that Rega sells a separate Stainless 2mm Shim for the older RB250 and RB300 arms — a different part for a different mounting, so check which arm you have.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2mm arm height spacer for Rega three-point tonearms\u003c\/li\u003e\n\u003cli\u003eFits under the tonearm base, between the three-point mounting and the plinth\u003c\/li\u003e\n\u003cli\u003eRaises the whole tonearm by 2mm to give clearance for deep-bodied cartridges\u003c\/li\u003e\n\u003cli\u003eAlso used when fitting a Rega arm to a non-Rega turntable\u003c\/li\u003e\n\u003cli\u003eNot a cartridge-to-headshell shim — a different product entirely\u003c\/li\u003e\n\u003cli\u003eFits all Rega three-point arms including the current Planar range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Tonearm arm height and VTA adjustment spacer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 2mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhere It Fits:\u003c\/strong\u003e Under the tonearm base, between the three-point tonearm mounting and the plinth or armboard. It does NOT fit between the cartridge and the headshell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose:\u003c\/strong\u003e In Rega’s wording, some other manufacturers’ cartridges have a deeper body than Rega cartridges and will sometimes require the three-point spacer to allow clearance of the rear of the cartridge from the vinyl. Also used to achieve correct arm height when a Rega arm is fitted to a non-Rega turntable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRega’s Guidance:\u003c\/strong\u003e On Rega turntables spacers should not be necessary unless you are using an exceptionally deep-bodied cartridge from another manufacturer. Adjustment should only be needed if the rear of a cartridge is hitting the record whilst playing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All Rega three-point tonearms, including the current Planar range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariants:\u003c\/strong\u003e Sold in two versions — Universal, laser cut from 2mm aluminium and anodised black, and Stainless, in stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot To Be Confused With:\u003c\/strong\u003e Rega’s separate Stainless 2mm Shim, which is for the older RB250 and RB300 tonearms and is a different part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in England. Rega Research Ltd, Southend-on-Sea, Essex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime Limited Warranty against confirmed manufacturing defects. It excludes wear and tear and parts considered consumable, and Rega states that unauthorised modification or failure to follow its guidelines may invalidate it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Published:\u003c\/strong\u003e The pack quantity — Rega does not state how many spacers are supplied, and nor do the dealers we checked. Ask us and we will confirm what is in the pack before you order\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rega","offers":[{"title":"Default Title","offer_id":39373544292558,"sku":"2MMS","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/products\/original_79fd95ee-42fd-405a-a706-4ca9457a0d61.jpg?v=1617416761","url":"https:\/\/www.theingroove.com\/products\/rega-2mm-3-point-spacer","provider":"The 'In' Groove","version":"1.0","type":"link"}