{"product_id":"rega-planar-8-turntable","title":"Rega - Planar 8 Turntable","description":"\u003cp\u003e\u003cstrong\u003eA skeletal plinth 30% lighter than the RP8, a triple layer glass platter, and the RB880 arm with bearings set to under a thousandth of a millimetre.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRega engineered the Planar 8, in its own words, to encapsulate the essence of Naiad at an affordable price — Naiad being the company’s thirty-thousand-pound reference project. Its defining feature is the skeletal plinth: a Tancast 8 polyurethane foam core skinned in high pressure laminate and then cut away to remove every gram Rega considered unnecessary. It comes out 30% lighter than the original RP8.\u003c\/p\u003e\n\u003cp\u003eThat leads to a number that surprises people, so it is worth meeting head on. The Planar 8 weighs 4.2kg — lighter than the Planar 6 at 5.2kg, lighter than the Planar 3 at 6.0kg, and identical to the entry-level Planar 1. That is not a downgrade or a typo. It is the whole design philosophy: mass stores energy and gives it back late, so Rega chases stiffness and removes mass wherever it can.\u003c\/p\u003e\n\u003cp\u003eThe platter runs the opposite argument deliberately. It is a triple layer laminated Pilkington glass assembly that concentrates mass at the outer rim for a flywheel effect while keeping the centre light. Below it sits a new low-mass bearing assembly: a single-piece machined aluminium sub-platter and hardened tool steel spindle in a custom brass housing.\u003c\/p\u003e\n\u003cp\u003eThe RB880 tonearm’s preloaded zero-tolerance bearing assembly is adjusted to under one thousandth of a millimetre. The custom-matched Neo PSU uses a DSP waveform generator that Rega says produces a near-perfect sine wave at under 0.15% distortion, giving front-panel 33\/45 speed change and 0.01 RPM fine adjustment. Cartridge is optional and factory-fitted, and a cartridge alignment protractor is supplied.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSkeletal Tancast 8 foam core plinth, 30% lighter than the original RP8\u003c\/li\u003e\n\u003cli\u003eTriple layer laminated Pilkington glass platter concentrating mass at the rim\u003c\/li\u003e\n\u003cli\u003eLow-mass bearing — single-piece machined aluminium sub-platter, hardened tool steel spindle, custom brass housing\u003c\/li\u003e\n\u003cli\u003eRB880 tonearm with preloaded zero-tolerance bearings adjusted to under 1\/1000th of a millimetre\u003c\/li\u003e\n\u003cli\u003eNeo PSU included and custom-matched, with DSP generator at under 0.15% distortion\u003c\/li\u003e\n\u003cli\u003eElectronic front-panel 33\/45 speed change with 0.01 RPM fine adjustment\u003c\/li\u003e\n\u003cli\u003eReference EBLT belt in a custom rubber compound\u003c\/li\u003e\n\u003cli\u003eCartridge optional — Nd7, Nd9, Ania Pro or Apheta 3 factory-fitted\u003c\/li\u003e\n\u003cli\u003eCartridge alignment protractor supplied; made in England\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Belt-drive turntable with tonearm and matched power supply; cartridge optional\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinth:\u003c\/strong\u003e Ultra-lightweight skeletal Tancast 8 polyurethane foam core with high pressure laminate layers, 30% lighter than the original RP8, with double brace technology\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatter:\u003c\/strong\u003e Triple layer laminated Pilkington float glass, three-piece construction concentrating mass at the outer rim while keeping the centre light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing:\u003c\/strong\u003e Low-mass assembly — single-piece machined aluminium sub-platter and hardened tool steel spindle running in a custom brass housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 24V synchronous, low-noise, low-vibration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed Change:\u003c\/strong\u003e Electronic. Press the 33\/45 button on the front panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 33-1\/3 and 45 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e Neo PSU MK2 included and custom-matched, with DSP generator producing a near-perfect sinusoidal waveform at less than 0.15% distortion. Dimensions 180 x 50 x 155 mm, weight 0.6kg. Speed adjustment step 0.01 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTonearm:\u003c\/strong\u003e RB880 with improved low-mass vertical bearing assembly in aluminium and stainless steel; preloaded zero-tolerance bearing assembly adjusted to less than 1\/1000th of a millimetre\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTonearm Geometry:\u003c\/strong\u003e Effective mass 11g; effective length 236.5mm; mounting distance 222mm from platter centre to arm hole centre; offset angle 21.55°; overhang 14.5mm. These figures are shared across the RB220, RB330, RB880 and RB3000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArm Height \/ VTA:\u003c\/strong\u003e Not adjustable. This is deliberate on Rega’s part rather than an omission, and the company states its reasoning plainly: it believes the integrity of the arm fixing to the arm board matters more than the questionable facility of arm height adjustment. Rega’s guidance is that the arm should sit reasonably parallel to the record surface or slightly lower at the mounting, and that its optional 2mm spacers are only needed if the rear of a cartridge fouls the record while playing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge:\u003c\/strong\u003e Optional factory-fitted — Nd7 or Nd9 moving magnet, or Ania Pro or Apheta 3 moving coil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Belt:\u003c\/strong\u003e Reference EBLT, custom rubber compound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 420 x 125 x 315 mm (W x H x D), with dustcover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.2kg turntable; Neo PSU 0.6kg. See the prose above — the Planar 8 is deliberately lighter than the decks below it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishes:\u003c\/strong\u003e Matt Polaris Grey, Matt White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied Accessories:\u003c\/strong\u003e Cartridge alignment protractor; unpacking guide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Rega Research Ltd, Southend-on-Sea, Essex. Rega’s own wording is that every product is designed and assembled in the UK — assembled rather than wholly manufactured, which is the phrasing we use rather than claiming complete UK component sourcing. Rega additionally states Made in England on this model\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime Limited Warranty against confirmed manufacturing defects. It does not cover wear and tear or parts considered consumable, and unauthorised modification may invalidate it. Rega states cover is contingent on parts remaining available, is not transferable, and is valid only in the country of purchase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Published:\u003c\/strong\u003e Platter thickness in millimetres — Rega describes it only as triple layer laminated glass; wow and flutter; rumble; speed accuracy; an itemised box contents list\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e The 0.016% figure that appears in Rega’s manual is the drift resolution of the supplied strobe disc method — one bar per minute — not a speed accuracy specification for the turntable, and we have not presented it as one. Rega publishes no wow and flutter, rumble or speed accuracy figure for any turntable in the Planar range. We checked every product page and five downloadable Rega manuals — Rega’s manuals are setup guides rather than datasheets, and contain no measurement section at all. Any such number you see quoted against a Rega deck comes from a third-party magazine test, not from Rega\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rega","offers":[{"title":"Black \/ No Cartridge","offer_id":41211053899982,"sku":"P8NOCART","price":3395.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Ania Pro","offer_id":42074292191438,"sku":"","price":4475.0,"currency_code":"USD","in_stock":false},{"title":"Black \/ Apheta 3","offer_id":41211053932750,"sku":"P8APH3","price":4945.0,"currency_code":"USD","in_stock":false},{"title":"White \/ No Cartridge","offer_id":42074292224206,"sku":"","price":3395.0,"currency_code":"USD","in_stock":false},{"title":"White \/ Ania Pro","offer_id":42074292289742,"sku":"","price":4475.0,"currency_code":"USD","in_stock":false},{"title":"White \/ Apheta 3","offer_id":42074292322510,"sku":"","price":4945.0,"currency_code":"USD","in_stock":false},{"title":"Black \/ Nd7","offer_id":43589621416142,"sku":null,"price":3895.0,"currency_code":"USD","in_stock":false},{"title":"White \/ Nd7","offer_id":43589621448910,"sku":null,"price":3895.0,"currency_code":"USD","in_stock":false},{"title":"Black \/ Nd9","offer_id":43589621481678,"sku":null,"price":4200.0,"currency_code":"USD","in_stock":false},{"title":"White \/ Nd9","offer_id":43589621514446,"sku":null,"price":4200.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/planar_8_gallery_01.jpg?v=1686762987","url":"https:\/\/www.theingroove.com\/products\/rega-planar-8-turntable","provider":"The 'In' Groove","version":"1.0","type":"link"}