{"product_id":"technics-sl-1500c-direct-drive-turntable","title":"Technics - SL-1500C Direct Drive Turntable","description":"\u003cp\u003e\u003cstrong\u003eThe SL-1200 drivetrain without the DJ furniture: coreless direct drive, a 332mm two-layer platter, an Ortofon 2M Red fitted at the factory, a built-in phono stage you can switch out of, and an auto-lift that saves your stylus when you fall asleep.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTechnics built the SL-1500C for people who wanted the direct-drive engineering the SL-1200 is famous for without paying for the pitch fader, the strobe and the target light they were never going to use. What you get instead is the same fundamental approach — a coreless, brushless DC motor driving the platter directly, with no belt to stretch and no idler to harden — wrapped in a package aimed squarely at a hi-fi rack.\u003c\/p\u003e\n\u003cp\u003eCoreless matters. A conventional motor has iron in its stator, and iron produces cogging: a faint magnetic notchiness as the rotor passes each pole. Remove the iron core and the cogging goes with it, which is why Technics can quote 0.025% wow and flutter and a start-up time of seven tenths of a second from standstill to 33 1\/3. Starting torque is 0.18N·m, so the platter is up to speed before the lead-in groove has finished.\u003c\/p\u003e\n\u003cp\u003eThree things make this a genuinely complete turntable rather than a chassis you have to finish yourself. An Ortofon 2M Red is fitted and aligned at the factory. A phono equaliser is built in at 37dB, with a rear switch and separate PHONO and LINE outputs so you can bypass it the day you buy a better one. And there is an Auto Lifter, which raises the arm at the end of the side — note that it lifts the arm only; the platter keeps turning and you still cue the record by hand at the start.\u003c\/p\u003e\n\u003cp\u003eThe tonearm is Technics’ static-balance S-shape with a removable T-type headshell, 230mm effective length, 15mm overhang, and arm height adjustable across 6mm. That last item is the one most turntables at this price omit, and it is the one that lets you actually set vertical tracking angle for a cartridge that is taller or shorter than the one that came fitted.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCoreless, brushless DC direct-drive motor — no cogging, no belt to replace\u003c\/li\u003e\n\u003cli\u003eOrtofon 2M Red moving-magnet cartridge fitted and aligned at the factory\u003c\/li\u003e\n\u003cli\u003eBuilt-in 37dB phono equaliser with separate PHONO and LINE outputs, so it can be bypassed\u003c\/li\u003e\n\u003cli\u003eAuto Lifter raises the tonearm at the end of the side\u003c\/li\u003e\n\u003cli\u003e332mm two-layer aluminium die-cast platter with rubber damping across the whole underside, 2kg\u003c\/li\u003e\n\u003cli\u003eStatic-balance S-shape tonearm with a removable T-type headshell and 0–6mm height adjustment\u003c\/li\u003e\n\u003cli\u003e33 1\/3, 45 and 78rpm\u003c\/li\u003e\n\u003cli\u003eSpring-and-rubber height-adjustable insulators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Direct drive manual turntable with Auto Lifter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Direct drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e Brushless DC motor. Technics’ formal spec table says only “brushless DC motor”; their US catalogue and marketing copy additionally describe it as a single-rotor coreless direct-drive motor. Coil and pole counts are not published\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatter:\u003c\/strong\u003e Aluminium die-cast, described in Technics’ US catalogue as a two-layer structure with deadening rubber across the entire back surface. 332mm diameter, approximately 2.0kg including the rubber turntable sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 33 1\/3, 45 and 78rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting torque:\u003c\/strong\u003e 0.18N·m (1.8kgf·cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart-up time:\u003c\/strong\u003e 0.7 seconds from standstill to 33 1\/3rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWow and flutter:\u003c\/strong\u003e 0.025% W.R.M.S. Technics states the W.R.M.S. weighting only and does not cite JIS, IEC or any other standard by name for this model\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRumble \/ signal-to-noise ratio:\u003c\/strong\u003e Not published on any Technics regional spec page, the US product page, the owner’s manual or the US catalogue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTonearm:\u003c\/strong\u003e Universal static balance, S-shape\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective tonearm length:\u003c\/strong\u003e 230mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverhang:\u003c\/strong\u003e 15mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffset angle:\u003c\/strong\u003e Not published on the SL-1500C’s own spec page. Technics publishes 22° for the closely related SL-1500CS, but we are not going to carry that figure across without Technics saying so\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective tonearm mass:\u003c\/strong\u003e Not published. Technics publishes no tonearm effective mass figure for any turntable in the current range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArm height adjustment:\u003c\/strong\u003e 0–6mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-skate:\u003c\/strong\u003e An anti-skating control dial is fitted and is set to match the stylus pressure. Technics does not publish what mechanism drives it — spring, magnet or thread-and-weight — on the product page or in the manual, so we are not going to guess.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadshell:\u003c\/strong\u003e T-type with a 1.2mm-diameter four-pin terminal lug, included and pre-fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge weight range:\u003c\/strong\u003e 5.6–12.0g without the auxiliary weight; 10.0–16.4g with it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge fitted:\u003c\/strong\u003e Ortofon 2M Red, moving-magnet, pre-mounted and aligned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridge specification:\u003c\/strong\u003e Technics’ own manual publishes only three figures for it: 5.5mV output, 1.8g stylus pressure and 7.2g mass. Stylus profile, cantilever material, frequency response, channel separation, recommended load and replacement stylus number are not published by Technics. Ortofon publishes a fuller specification for the 2M Red separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in phono equaliser:\u003c\/strong\u003e Yes, 37dB gain. Separate PHONO and LINE outputs with a rear switch, so the internal stage can be bypassed. THD, RIAA deviation and signal-to-noise for the phono stage are not published\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto lift:\u003c\/strong\u003e Auto Lifter raises the tonearm at the end of the record. Technics’ manual is explicit that it does not stop the platter. Cueing at the start of a side is manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e PHONO (pin jack) x1, LINE (pin jack) x1, earth terminal x1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulators:\u003c\/strong\u003e Spring and rubber, height-adjustable by rotating the foot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 453 x 169 x 372 mm (W x H x D). Technics publishes one figure and does not separate dust cover open, closed or removed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 9.9kg. Technics’ own documents disagree on the pound conversion: the US product page says 21.2 lbs while the owner’s manual and US catalogue both say 21.9 lbs. 9.9kg is about 21.8 lbs, so the product page figure appears to be the error\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e AC 120V, 60Hz in the US. Technics’ global pages list AC 110–240V, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 8.0W on; approximately 0.2W off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of manufacture:\u003c\/strong\u003e Not published. Technics prints no country-of-manufacture statement on its product pages, specification sheets or owner’s manuals for any model in the current range — we checked all three for this product. Claims circulate online about where Technics builds its turntables; none of them come from Technics, so we are not going to repeat them here as fact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Panasonic administers Technics warranty in the United States and the term varies by model rather than by product category. The SL-1500C is listed in Technics’ own US warranty table at two years parts and two years labour. Technics states that product registration is not required and does not extend coverage. A dated sales receipt is required, coverage runs to the original purchaser, and the product must be purchased and serviced in the United States. Non-rechargeable batteries, antennas and cosmetic cabinet parts are excluded. Note that Technics’ warranty statement does not explicitly name styli or cartridges as excluded items, even though wear-part exclusion is normal industry practice — we would not assume coverage either way without asking Panasonic first.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Technics","offers":[{"title":"Silver","offer_id":42071842455758,"sku":"885170353916","price":1499.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":42071842488526,"sku":"885170368125","price":1499.99,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":42071842521294,"sku":"885170410794","price":1499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/5027\/0926\/files\/ShopifySL-1500C_-S__1_3000x_4a5ab7cc-c59d-4e68-b514-e5bc98980141.webp?v=1686528482","url":"https:\/\/www.theingroove.com\/products\/technics-sl-1500c-direct-drive-turntable","provider":"The 'In' Groove","version":"1.0","type":"link"}